Devices for local smart homes

Moes Star Ring ZK-SR-EU Zigbee in-wall socket 16A energy monitor, white

The white Star Ring in-wall Zigbee socket meters every watt the load behind it draws and switches up to 16 A — 3500 W at 230 V — straight from scenes.

Moes Star Ring Zigbee in-wall socket with energy meter 16A, grey

Grey in-wall Zigbee socket that measures in real time what the boiler, AC or fridge draws and cuts standby on a schedule.

Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.

Smoothly dims mains-voltage dimmable lamps over Zigbee: an existing halogen or LED fixture gains flicker-free brightness control, with no LED strip involved.

A renovation with the neutral already pulled: the ZS-SR-EU1-LN wires to L+N, switches LEDs without flicker and lights a white Star Ring halo.

The relay runs off line and neutral together, so LED bulbs hold steady — no flicker and no ghost glow in the off position the way no-neutral switches can show.

Chase, rainbow and per-pixel effects on a WS281x addressable strip, run from Smart Life through a Tuya ZigBee gateway: two SPI outputs, 15 A.

On the panel's DIN rail, the A5 breaker cuts a circuit remotely, meters its kWh and trips on overcurrent, overvoltage and overheating.

The cheap box every Tuya Zigbee setup starts from: it links up to 50 sensors and modules into one Smart Life app, powered over USB 5V.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

Swaps a dumb ceiling spot for a 6W ZigBee downlight that runs from warm 1800K to cool 6500K and joins the home's lighting scenes.

At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.

On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.

Compact 7W ZigBee spot for a hallway, accent niche or small ceiling: tunable 2700K-6500K white plus RGB, via a Tuya gateway.

A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.

Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.

A 2 m sensing cable slides under the washer or behind the boiler where the round sensor cannot fit, picking up water along its whole braid while the SNZB-05P stays dry.

Two keys, and each light zone can follow presence on its own: the 10 GHz mmWave radar lights the hall as you enter and clears the bedroom as you leave, white, Zigbee 3.0.

A GU10 Zigbee 3.0 spotlight bulb with RGB plus tunable 2200–6500K white that screws straight into a 230 V GU10 socket and runs off any Zigbee hub.

The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.

Even task light over a worktop or mirror: a 9W ZigBee downlight, 1055 lm, 120° beam, warm 2700K to cool 6500K, via a Tuya gateway.

Stuck with 3M tape onto a door, safe or drawer, the Moes sensor catches a knock or a forced move and pushes the alarm to the Tuya app over Zigbee.

Matchbox-sized and 40% smaller than the ZBMINIL, the ZBMINIL2 tucks into the cramped box behind an existing switch and makes the light smart with no neutral.

The hallway switch that notices you walked in: a 10 GHz mmWave radar turns the light on and holds it while you linger, with or without neutral.