Brand catalog
LED controllers and smart lighting.
CasaSmart
CASASMART × GLEDOPTO
WARRANTY & SUPPORT
All GLEDOPTO devices come with manufacturer warranty applied through CasaSmart. Defective unit? Bring it to the showroom or we arrange pickup. We respond within 1 business hour.
FOR INSTALLERS
Apply for a CasaSmart partner account: partner pricing, direct site shipping, dedicated technical WhatsApp, product training.
CasaSmart × GLEDOPTO
All GLEDOPTO products we stock, with CasaSmart installation.
Four digital outputs on one WLED ESP32: the GL-C-618WL drives up to 1600 pixels across large installs over Wi-Fi or Ethernet, no hub.
779MDL
For Sonoff, Moes, IMOU, Gledopto, GVS (KNX), Anviz, and LinknLink we hold official importer or authorized distributor status in the Republic of Moldova. For Aqara we work through an authorized European channel with EU warranty. All GLEDOPTO products listed here come with a fiscal invoice and local warranty.
With two digital outputs and an Ethernet port, the Elite 2D-EXMU runs WLED on an ESP32 and drives two addressable-pixel strips from one controller, no hub.
From the Tuya/Smart Life app it runs a WS2812B or SK6812 addressable strip with no gateway: over Wi-Fi, pixel effects, two SPI outputs and up to 1000 LEDs.
Two digital outputs on an ESP32 with WLED pre-flashed: the GL-C-615WL drives two addressable strips over Wi-Fi from the WLED UI, no gateway.
Smoothly dims mains-voltage dimmable lamps over Zigbee: an existing halogen or LED fixture gains flicker-free brightness control, with no LED strip involved.
Chase, rainbow and per-pixel effects on a WS281x addressable strip, run from Smart Life through a Tuya ZigBee gateway: two SPI outputs, 15 A.
The Type-C UART port lets any enthusiast reflash and update the WLED firmware on the ESP32, while the GL-C-017WL-D drives pixel LEDs over Wi-Fi with no gateway.
A single digital output on an ESP32 running WLED firmware: the cheapest way into pixel effects on one addressable strip, over Wi-Fi with no gateway.
At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.
On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.
A GU10 Zigbee 3.0 spotlight bulb with RGB plus tunable 2200–6500K white that screws straight into a 230 V GU10 socket and runs off any Zigbee hub.
An RGB+CCT strip controller that speaks Matter over Wi-Fi directly and joins Apple Home, Google Home and Alexa with no Zigbee hub or Tuya gateway.
Battery wall touch panel that runs Gledopto RGB+CCT light across 4 zones over 2.4G RF — sticks on any wall with no wiring, no hub and no app.
The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.
Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.
An MR16 G5.3 spotlight on 12–24V: the same lamp in a low-voltage track or fitting turns RGB plus tunable 2200–6500K white, run from any Zigbee 3.0 hub.
Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.
A handheld touch-ring remote that drives six Gledopto RGB+CCT zones directly over 2.4G RF — no hub, no app, on two AAA batteries.
24 months from purchase on all GLEDOPTO products bought from CasaSmart. Repair or replacement is handled in Chișinău — no need to ship the device to China/EU. Factory defects: free exchange within 7 business days.
Most GLEDOPTO models expose Zigbee 3.0 or Matter, making them natively compatible with Home Assistant (Zigbee2MQTT / ZHA) and with Apple Home via Matter bridge. For Wi-Fi proprietary models (e.g. some cloud-only Sonoff subsets) we can flash Tasmota or ESPHome firmware on request.
At our showroom at str. Columna 153, Chișinău (Mon-Fri 09:00-18:00, Sat 10:00-16:00). The most popular GLEDOPTO products are functionally exhibited on demo panels — you can actually test them, not just look through a window.
Yes. Gledopto makes Zigbee 3.0 LED controllers (GL-* PRO models) and Zigbee+RF hybrids (GL-C-* series). All work natively with Home Assistant via Zigbee2MQTT or ZHA through a standard Zigbee hub (Sonoff Dongle-E, SMLight). They support RGB+CCT, single-color, and dimmable — the exact mode is auto-detected at pairing.
