Devices for local smart homes

Moes ZHUB-W-MS Tuya Zigbee 3.0 smart gateway hub

The cheap box every Tuya Zigbee setup starts from: it links up to 50 sensors and modules into one Smart Life app, powered over USB 5V.

Sonoff AirGuard TH SNZB-02DR2 Zigbee temperature and humidity sensor 3.6″ LCD

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

Swaps a dumb ceiling spot for a 6W ZigBee downlight that runs from warm 1800K to cool 6500K and joins the home's lighting scenes.

At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.

On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.

A 12 W ZigBee recessed spot pushing 1400 lm — bright enough to carry a living room's main light, from warm 2700K to cool 6500K, plus RGB.

Read temperature and humidity straight off the E-Ink screen on the shelf, while a Tuya Zigbee gateway sends the values to the Smart Life app for alarms and scenes.

Compact 7W ZigBee spot for a hallway, accent niche or small ceiling: tunable 2700K-6500K white plus RGB, via a Tuya gateway.

A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.

Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.

A 2 m sensing cable slides under the washer or behind the boiler where the round sensor cannot fit, picking up water along its whole braid while the SNZB-05P stays dry.

Two keys, and each light zone can follow presence on its own: the 10 GHz mmWave radar lights the hall as you enter and clears the bedroom as you leave, white, Zigbee 3.0.

A GU10 Zigbee 3.0 spotlight bulb with RGB plus tunable 2200–6500K white that screws straight into a 230 V GU10 socket and runs off any Zigbee hub.

The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.

Even task light over a worktop or mirror: a 9W ZigBee downlight, 1055 lm, 120° beam, warm 2700K to cool 6500K, via a Tuya gateway.

Stuck with 3M tape onto a door, safe or drawer, the Moes sensor catches a knock or a forced move and pushes the alarm to the Tuya app over Zigbee.

Matchbox-sized and 40% smaller than the ZBMINIL, the ZBMINIL2 tucks into the cramped box behind an existing switch and makes the light smart with no neutral.

A boiler or a gate motor does not want 220 V from a relay — it waits for two signal wires to close, and the MINI-D dry contact does exactly that on app, schedule or voice command.

A regular relay will not fit behind the switch in a shallow flush box — the 39.5×33×16.8 mm MINIR4M will, 40% smaller than MINIR2 and with a Detach Relay mode on top.

The hallway switch that notices you walked in: a 10 GHz mmWave radar turns the light on and holds it while you linger, with or without neutral.

Hidden in the box behind a two-gang switch with no neutral, the Moes Zigbee module runs two light lines from the app while keeping the wall key.

Tucked behind an existing 2-gang switch, this Matter-over-Wi-Fi relay joins Apple Home, Google Home and Alexa directly, with no extra gateway to buy.

When a renovation already runs a neutral to every switch box, the ZBMINIR2 uses it to keep a light on local Zigbee — controlled by your hub, not a cloud.

Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.