CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
182 products
Active filters

579MDL

Affordable RGB accent lighting for a TV wall or shelving with no hub required: 5 metres, eWeLink control over Wi-Fi and Bluetooth, 12V EU adapter and IR remote in the box.

Zigbee sensors and automations without a server or Home Assistant: the ZBBridge-P brings up to 128 devices into the eWeLink app over 2.4 GHz Wi-Fi — no Ethernet port.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Add app and voice control to your Midea AC: a 2.4 GHz USB Wi-Fi dongle that plugs into the indoor unit and pairs with the MSmartHome app.

Back box with only line and a wire to the fixture? The ZS-SR-EU1 fits without a neutral too: a 10A Zigbee Star Ring switch with a grey halo.

A 10W ZigBee recessed spot with a 132mm face: tunable 2700K-6500K white plus RGB, brighter light for a kitchen or larger room, via a Tuya gateway.

The white Star Ring in-wall Zigbee socket meters every watt the load behind it draws and switches up to 16 A — 3500 W at 230 V — straight from scenes.

Grey in-wall Zigbee socket that measures in real time what the boiler, AC or fridge draws and cuts standby on a schedule.

Where graphite sockets and black handles set the palette, the dim-gray M5 finally blends in — and an eWeLink home keeps schedules and voice control without paying for Matter.

A kitchen is hard on light switches — this tempered-glass front wipes clean in one pass, and two touch channels keep ceiling light and worktop lighting on separate keys.

A renovation with the neutral already pulled: the ZS-SR-EU1-LN wires to L+N, switches LEDs without flicker and lights a white Star Ring halo.

The relay runs off line and neutral together, so LED bulbs hold steady — no flicker and no ghost glow in the off position the way no-neutral switches can show.

With a probe doing the measuring, the THR316D does the holding: set degrees or humidity stay on target through up to 8 Auto programs, 16 A of load and a live LCD readout.

Two imou CE2P Matter-over-Wi-Fi plugs, 16 A each, with energy metering: they join Apple Home, Google Home, Alexa and Home Assistant directly, no hub.
499

Learns the 433MHz RF remotes of blinds, sockets and switches and brings them into Home Assistant over Wi-Fi through RF2MQTT, no cloud.

On the panel's DIN rail, the A5 breaker cuts a circuit remotely, meters its kWh and trips on overcurrent, overvoltage and overheating.

The cheap box every Tuya Zigbee setup starts from: it links up to 50 sensors and modules into one Smart Life app, powered over USB 5V.

A light tap on the tempered glass replaces the old click — the panel responds instantly, an LED glow marks it at night, and Wi-Fi adds schedules and voice control.

A glance at the relay tells you watts, volts, amps and total kWh on its built-in LCD — no phone required, with six months of hourly history kept in eWeLink.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

A motionless reader is invisible to PIR — the SNZB-06P's 5.8 GHz radar tracks breathing instead, keeping lights on while you stay put. Automations run through a Zigbee 3.0 hub.

Sonoff moved its strip line from the L2's 12V brick to USB Type-C power in the L3 — no adapter ships in the box, so plan on your own 5V/2A charger or a power bank.

Swaps a dumb ceiling spot for a 6W ZigBee downlight that runs from warm 1800K to cool 6500K and joins the home's lighting scenes.

Dimming the bedroom from the nightstand takes one press on the RM433 remote, while Wi-Fi gives the budget-friendly D1 schedules, voice control and sunset scenes in eWeLink.
599MDL