CasaSmart catalog
Devices for local smart homes
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
Home AssistantZigbeeMatterLocal-firstOfficial import
64 products
Active filters
64 products
CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
64 products
Active filters
679MDL
Shower steam and balcony frost are exactly where the SNZB-02WD belongs: an IP65 case, a −20 to +60 °C range and a 2.2″ LCD; automations come alive once a Zigbee 3.0 hub joins.
Backlighting a monitor, a shelf or a hallway mirror takes exactly the two metres this Sonoff L2 ships with — no dead offcuts, and IP65 lets it line a kitchen splashback.
Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.
One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.
A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.
Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.
649MDL
In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.
629
Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.
A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.
One Duo module behind a double rocker runs both lighting lines at once — chandelier and sconce keep their own wall keys yet switch independently via app or voice, 10 A per channel.
599
Behind the shutter buttons already on your wall, MINI-RBS slips into the round Ø60 mm flush box and gives the motor schedules, percentage control and Matter.
599
The smart layer hides flush in the wall: the WS01TPF-E replaces a regular socket in its mounting box, joins any Matter ecosystem over Wi-Fi and meters loads up to 16 A.
599MDL
Affordable RGB accent lighting for a TV wall or shelving with no hub required: 5 metres, eWeLink control over Wi-Fi and Bluetooth, 12V EU adapter and IR remote in the box.
Zigbee sensors and automations without a server or Home Assistant: the ZBBridge-P brings up to 128 devices into the eWeLink app over 2.4 GHz Wi-Fi — no Ethernet port.
To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.
Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.
A glance at the relay tells you watts, volts, amps and total kWh on its built-in LCD — no phone required, with six months of hourly history kept in eWeLink.
Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.
A motionless reader is invisible to PIR — the SNZB-06P's 5.8 GHz radar tracks breathing instead, keeping lights on while you stay put. Automations run through a Zigbee 3.0 hub.
Sonoff moved its strip line from the L2's 12V brick to USB Type-C power in the L3 — no adapter ships in the box, so plan on your own 5V/2A charger or a power bank.
POW Origin turns electricity-bill guesswork into hourly kilowatt-hour records — a week of eWeLink charts shows which appliance leads, with six months of history kept.
See what each of two loads really draws: the DUALR3 meters voltage, current, power and accumulated kWh independently per 10 A channel, with overload cut-off.
A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.
Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.
599MDL