Devices for local smart homes

Sonoff ZBMINIL2-E Zigbee 3.0 no-neutral single-gang wall switch

Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.

Sonoff SwitchMan M5 Matter smart wall switch, 3-gang, 86 type, white

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.

Two light zones on a firm neutral (L+N): each key switches cleanly, no LED flicker and no dim glow when off, on a grey panel with the Star Ring halo.

A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.

A grey glass panel with a glowing ring shows the level, and holding a button dims the light smoothly through a Tuya Zigbee gateway — for dimmable LEDs up to 200 W.

Screws onto the radiator valve and gives each room its own heating schedule — Zigbee 3.0 through a Tuya gateway, cutting winter gas waste.

A 3 kW heater overloads an ordinary 10A smart relay; the ZS-SR-EUB holds 20A / 4000W, breaks both poles and meters the kilowatts live over Zigbee.

Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.

A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.

Affordable RGB accent lighting for a TV wall or shelving with no hub required: 5 metres, eWeLink control over Wi-Fi and Bluetooth, 12V EU adapter and IR remote in the box.

Zigbee sensors and automations without a server or Home Assistant: the ZBBridge-P brings up to 128 devices into the eWeLink app over 2.4 GHz Wi-Fi — no Ethernet port.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Back box with only line and a wire to the fixture? The ZS-SR-EU1 fits without a neutral too: a 10A Zigbee Star Ring switch with a grey halo.

A 10W ZigBee recessed spot with a 132mm face: tunable 2700K-6500K white plus RGB, brighter light for a kitchen or larger room, via a Tuya gateway.

The white Star Ring in-wall Zigbee socket meters every watt the load behind it draws and switches up to 16 A — 3500 W at 230 V — straight from scenes.

Grey in-wall Zigbee socket that measures in real time what the boiler, AC or fridge draws and cuts standby on a schedule.

Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.

A renovation with the neutral already pulled: the ZS-SR-EU1-LN wires to L+N, switches LEDs without flicker and lights a white Star Ring halo.

The relay runs off line and neutral together, so LED bulbs hold steady — no flicker and no ghost glow in the off position the way no-neutral switches can show.

On the panel's DIN rail, the A5 breaker cuts a circuit remotely, meters its kWh and trips on overcurrent, overvoltage and overheating.

The cheap box every Tuya Zigbee setup starts from: it links up to 50 sensors and modules into one Smart Life app, powered over USB 5V.

A glance at the relay tells you watts, volts, amps and total kWh on its built-in LCD — no phone required, with six months of hourly history kept in eWeLink.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.