Devices for local smart homes

Moes MWM-104B-MS Matter-over-Wi-Fi 2-gang relay module 10 A, no hub

Tucked behind an existing 2-gang switch, this Matter-over-Wi-Fi relay joins Apple Home, Google Home and Alexa directly, with no extra gateway to buy.

When a renovation already runs a neutral to every switch box, the ZBMINIR2 uses it to keep a light on local Zigbee — controlled by your hub, not a cloud.

Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.

Tucked out of sight on a shelf, the SNZB-02P feeds your TRV, humidifier and air conditioner the numbers they act on — any Zigbee 3.0 hub pulls it into your scenes.

Lighting a whole flat takes a relay per light point, so unit price decides: the Wi-Fi MINIR4 Extreme keeps 10 A and Detach Relay while costing less than its Matter sibling.

Switch a boiler or heater from your phone and watch its real power draw: Smart Plug 2 meters consumption live and handles loads up to 3680 W.

An MR16 G5.3 spotlight on 12–24V: the same lamp in a low-voltage track or fitting turns RGB plus tunable 2200–6500K white, run from any Zigbee 3.0 hub.

Catch the leak while it is still a drip — this floor sensor trips at just 0.5 mm of water and wakes your phone and the Zigbee hub siren before the screed soaks through.

Walk in and the light is already on: the SNZB-03P PIR fires within 5 seconds, covers 6 m at 110° and runs over 3 years on one CR2477 cell; automations live on a Zigbee 3.0 hub.

By day the SNZB-04P flips on the hallway light as the door opens; with the flat empty it turns guard and pushes an instant alert — automations call for a Zigbee 3.0 coordinator.

The extra money over the white B02-BL buys exactly one thing — a 16-million-colour palette on top of the same 9 W, 806 lm tunable 2700–6500 K white.

Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.

No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.

Lights up on its own the moment you walk past in the dark: 120° motion sensor, warm 2800K glow and setup from the Xiaomi Home app.

A large LCD shows room temperature and humidity at a glance, driven by a Sensirion sensor and paired over Bluetooth to the Xiaomi Home app.

Passive PoE splitter that turns one 802.3af line into two outputs and carries data plus power another 100 m — to power SLZB-06 coordinators where there is no socket.

Sat under the sink or by the washer, the ZWS16 senses the first drops, sounds a local alarm and pushes a phone alert through a Zigbee gateway.

Countless DIY smart homes began with a cheap Sonoff Basic relay. The fifth generation keeps that recipe — one 10 A line, nothing extra — and now speaks Matter.

When an ordinary bulb burns out, screw this one into the same E27 socket and the room gains scheduled warm-to-cool white, a gentle wake-up light and phone control — no hub needed.

A single-channel Zigbee 3.0 relay that hides in the back-box behind the key and keeps the light on a local mesh through a Tuya Zigbee gateway, off the home Wi-Fi.

For Zigbee2MQTT experiments and a small network of up to ~20 devices this legacy CC2531 dongle still does the job — no external antenna, firmware updates need a programmer.

Reads room temperature and humidity on a 1.5" LCD, powered by a Sensirion sensor with Bluetooth sync to the Xiaomi Home app.

One tap fires a whole scene — a Xiaomi Zigbee button with single, double and long press, stuck anywhere with adhesive tape.

Stick the two halves on the door and frame: the moment the door or window opens, the ZDS16 sends a Zigbee alert to your phone.