Devices for local smart homes

Sonoff Dongle Plus MG24 Zigbee/Thread USB coordinator (Dongle-PMG24)

If your mesh keeps growing, the EFR32MG24 with 1536 KB Flash and 256 KB RAM keeps up — and a reflash turns the dongle into a Thread or Matter radio.

The multiprotocol TI CC2674P10 radio with an ESP32-S3 host makes the SLZB-06p10 a coordinator that switches in firmware between Zigbee 3.0 and Thread, over Ethernet or USB-C.

Built on the EFR32MG24, the SLZB-06Mg24 runs Zigbee 3.0 and Thread on one radio, so your Home Assistant network reaches Matter-over-Thread too, not just Zigbee.

With an IC behind every one of its 150 LEDs, the Sonoff L3 Pro shows several colours at once and runs chasing gradients along all 5 metres — the 5V adapter is sold separately.

Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.

Kitchen thermometer with two stainless probes rated to 300 °C, its own display and Bluetooth monitoring in the eWeLink app, with an alert when the target temperature is reached.

Covers the whole room with 360° pan and 2K detail, tracks motion, tells people from pets, talks both ways and sees in colour at night.

Backlighting a monitor, a shelf or a hallway mirror takes exactly the two metres this Sonoff L2 ships with — no dead offcuts, and IP65 lets it line a kitchen splashback.

The 43 mm body with its tilting antenna takes just one server USB port, and the bundled 0.5 m extension keeps the coordinator radio clear of USB 3.0 noise.

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

Affordable RGB accent lighting for a TV wall or shelving with no hub required: 5 metres, eWeLink control over Wi-Fi and Bluetooth, 12V EU adapter and IR remote in the box.

Zigbee sensors and automations without a server or Home Assistant: the ZBBridge-P brings up to 128 devices into the eWeLink app over 2.4 GHz Wi-Fi — no Ethernet port.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Reads weight, 25 body-composition metrics and heart rate, then syncs everything to the Xiaomi Home app over Bluetooth for up to 36 profiles.

At the heart of a Xiaomi smart home, this hub unites Zigbee 3.0, Bluetooth and Wi-Fi sensors and lights in one app, with Apple HomeKit support.

A glance at the relay tells you watts, volts, amps and total kWh on its built-in LCD — no phone required, with six months of hourly history kept in eWeLink.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

Sonoff moved its strip line from the L2's 12V brick to USB Type-C power in the L3 — no adapter ships in the box, so plan on your own 5V/2A charger or a power bank.

POW Origin turns electricity-bill guesswork into hourly kilowatt-hour records — a week of eWeLink charts shows which appliance leads, with six months of history kept.

Thermometer, hygrometer and clock in one body with a 3.7" E-ink screen. Temperature, humidity and time at a single glance.

See what each of two loads really draws: the DUALR3 meters voltage, current, power and accumulated kWh independently per 10 A channel, with overload cut-off.

Lighting a whole flat takes a relay per light point, so unit price decides: the Wi-Fi MINIR4 Extreme keeps 10 A and Detach Relay while costing less than its Matter sibling.

Switch a boiler or heater from your phone and watch its real power draw: Smart Plug 2 meters consumption live and handles loads up to 3680 W.

The extra money over the white B02-BL buys exactly one thing — a 16-million-colour palette on top of the same 9 W, 806 lm tunable 2700–6500 K white.