CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
CasaSmart picks
94 products
Active filters
449MDL
Swaps a dumb ceiling spot for a 6W ZigBee downlight that runs from warm 1800K to cool 6500K and joins the home's lighting scenes.
A 12 W ZigBee recessed spot pushing 1400 lm — bright enough to carry a living room's main light, from warm 2700K to cool 6500K, plus RGB.
Read temperature and humidity straight off the E-Ink screen on the shelf, while a Tuya Zigbee gateway sends the values to the Smart Life app for alarms and scenes.
Compact 7W ZigBee spot for a hallway, accent niche or small ceiling: tunable 2700K-6500K white plus RGB, via a Tuya gateway.
A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.
Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.
Two keys, and each light zone can follow presence on its own: the 10 GHz mmWave radar lights the hall as you enter and clears the bedroom as you leave, white, Zigbee 3.0.
Even task light over a worktop or mirror: a 9W ZigBee downlight, 1055 lm, 120° beam, warm 2700K to cool 6500K, via a Tuya gateway.
Stuck with 3M tape onto a door, safe or drawer, the Moes sensor catches a knock or a forced move and pushes the alarm to the Tuya app over Zigbee.
Matchbox-sized and 40% smaller than the ZBMINIL, the ZBMINIL2 tucks into the cramped box behind an existing switch and makes the light smart with no neutral.
Read the room from the doorway — the SNZB-02D's large LCD shows temperature and humidity with no phone in hand, while Zigbee feeds your automations; a Zigbee 3.0 hub is required.
The hallway switch that notices you walked in: a 10 GHz mmWave radar turns the light on and holds it while you linger, with or without neutral.
Hidden in the box behind a two-gang switch with no neutral, the Moes Zigbee module runs two light lines from the app while keeping the wall key.
When a renovation already runs a neutral to every switch box, the ZBMINIR2 uses it to keep a light on local Zigbee — controlled by your hub, not a cloud.
Tucked out of sight on a shelf, the SNZB-02P feeds your TRV, humidifier and air conditioner the numbers they act on — any Zigbee 3.0 hub pulls it into your scenes.
Catch the leak while it is still a drip — this floor sensor trips at just 0.5 mm of water and wakes your phone and the Zigbee hub siren before the screed soaks through.
Walk in and the light is already on: the SNZB-03P PIR fires within 5 seconds, covers 6 m at 110° and runs over 3 years on one CR2477 cell; automations live on a Zigbee 3.0 hub.
By day the SNZB-04P flips on the hallway light as the door opens; with the flat empty it turns guard and pushes an instant alert — automations call for a Zigbee 3.0 coordinator.
No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.
Sat under the sink or by the washer, the ZWS16 senses the first drops, sounds a local alarm and pushes a phone alert through a Zigbee gateway.
A single-channel Zigbee 3.0 relay that hides in the back-box behind the key and keeps the light on a local mesh through a Tuya Zigbee gateway, off the home Wi-Fi.
Stick the two halves on the door and frame: the moment the door or window opens, the ZDS16 sends a Zigbee alert to your phone.