CasaSmart catalog
Devices for local smart homes
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
Home Assistant
Zigbee
Matter
Local-firstOfficial import98 products
Active filters
98 products
CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
98 products
Active filters
1,599MDL
Via the built-in Matter bridge, Zigbee sensors and relays show up in Apple Home, Google Home, Alexa and SmartThings; Ethernet RJ45 or 2.4 GHz Wi-Fi, up to 256 sub-devices.
A round dial with a glowing white ring holds electric floor heating over Zigbee, scheduling up to 48 steps a day; a Zigbee gateway is required.
The grey Star Ring glass dial holds an electric floor across 48 daily slots and is controlled locally over Zigbee through a Tuya gateway — not WiFi.
The white Star Ring glowing dial drives a gas or water boiler at 5 A over Zigbee, with up to 48 daily schedule steps and on-screen readout to 99 °C.
Grey glass panel with a glowing Star Ring runs a gas or water boiler over Zigbee locally: schedule, eco and access from Tuya, Alexa and Google Home.
A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.
Clips onto the curtain rings you already have and drives the drape electrically — no new rail, no electrician, renter-friendly in a Chișinău flat.
When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.
Frameless white matte glass with floating full-touch across the whole face: one plate runs four light lines through the home Zigbee gateway.
Four separate loads on one grey plate by the door: hallway light, stairs, terrace and a sconce each run their own line through a Zigbee gateway, no four-frame wall.
An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.
With an IC behind every one of its 150 LEDs, the Sonoff L3 Pro shows several colours at once and runs chasing gradients along all 5 metres — the 5V adapter is sold separately.
The scenario is simple: on a leak-sensor alert the hub shuts the SWV-BSP valve, and on schedule it opens garden watering for a set water volume — all over Zigbee 3.0.
Sonoff TRVZB smart Zigbee 3.0 radiator valve with heating schedules, open-window detection, child lock and frost protection, controlled via eWeLink and Home Assistant.
Three light lines in one room go under a single matte-glass white panel: pull the tired triple switch and screw in a Zigbee mechanism, with no new chasing.
Three light lines of an open kitchen-living sit on one grey feather-textured frame: ceiling, spots and table, each on its own touch key.
Carbon monoxide from a gas boiler or stove has no smell — this Moes Zigbee detector catches it early, sounds above 85 dB and pushes an alert to the phone.
Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.
A smoulder in a bedroom at night barely wakes anyone — this Moes photoelectric sensor screams above 85 dB and, via a gateway, pushes the alert to the phone too.
A tap switches the light, a long-press on the same key fires a whole-room scene: two white zones on an 86 mm frame, Zigbee 3.0, matte glass.
Your finger feels every press: a short, four-level adjustable buzz confirms the command in the dark, while two grey zones run the ceiling light and the wall sconce apart.
Work at a desk for hours, barely moving: the 24GHz radar keeps you "present", with fine distance zones that crop the doorway behind you.
Add one more repeater to your Zigbee mesh: wired with neutral, the ZBM5 relays the network and answers a local Home Assistant — no cloud, no account.
Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.