CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
136 products
Active filters

The Type-C UART port lets any enthusiast reflash and update the WLED firmware on the ESP32, while the GL-C-017WL-D drives pixel LEDs over Wi-Fi with no gateway.

A single digital output on an ESP32 running WLED firmware: the cheapest way into pixel effects on one addressable strip, over Wi-Fi with no gateway.

A glance at the relay tells you watts, volts, amps and total kWh on its built-in LCD — no phone required, with six months of hourly history kept in eWeLink.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

A motionless reader is invisible to PIR — the SNZB-06P's 5.8 GHz radar tracks breathing instead, keeping lights on while you stay put. Automations run through a Zigbee 3.0 hub.

Dimming the bedroom from the nightstand takes one press on the RM433 remote, while Wi-Fi gives the budget-friendly D1 schedules, voice control and sunset scenes in eWeLink.

POW Origin turns electricity-bill guesswork into hourly kilowatt-hour records — a week of eWeLink charts shows which appliance leads, with six months of history kept.

At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.

On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.

A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.

Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.

A 2 m sensing cable slides under the washer or behind the boiler where the round sensor cannot fit, picking up water along its whole braid while the SNZB-05P stays dry.

A GU10 Zigbee 3.0 spotlight bulb with RGB plus tunable 2200–6500K white that screws straight into a 230 V GU10 socket and runs off any Zigbee hub.

An RGB+CCT strip controller that speaks Matter over Wi-Fi directly and joins Apple Home, Google Home and Alexa with no Zigbee hub or Tuya gateway.
419

The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.

Matchbox-sized and 40% smaller than the ZBMINIL, the ZBMINIL2 tucks into the cramped box behind an existing switch and makes the light smart with no neutral.

A boiler or a gate motor does not want 220 V from a relay — it waits for two signal wires to close, and the MINI-D dry contact does exactly that on app, schedule or voice command.
399

A regular relay will not fit behind the switch in a shallow flush box — the 39.5×33×16.8 mm MINIR4M will, 40% smaller than MINIR2 and with a Detach Relay mode on top.
399

Read the room from the doorway — the SNZB-02D's large LCD shows temperature and humidity with no phone in hand, while Zigbee feeds your automations; a Zigbee 3.0 hub is required.

Hidden in the box behind a two-gang switch with no neutral, the Moes Zigbee module runs two light lines from the app while keeping the wall key.

When a renovation already runs a neutral to every switch box, the ZBMINIR2 uses it to keep a light on local Zigbee — controlled by your hub, not a cloud.

Six scene keys go on a wall that never had wiring — 3M tape holds them. Presses travel straight to SONOFF relays with eWeLink-Remote; without such a receiver the R5 does nothing.

Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.

Tucked out of sight on a shelf, the SNZB-02P feeds your TRV, humidifier and air conditioner the numbers they act on — any Zigbee 3.0 hub pulls it into your scenes.