CasaSmart catalog
Devices for local smart homes
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
Home AssistantZigbeeMatterLocal-firstOfficial import
136 products
Active filters
136 products
CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
136 products
Active filters
679MDL
Dozens of Zigbee devices in Zigbee2MQTT or ZHA on a single stick: the TI CC2652P coordinator with +20 dBm output holds up to 200 nodes and reflashes into a router.
Unlike the ZBDongle-P built on the TI CC2652P, revision E runs a Silicon Labs EFR32MG21 with EmberZNet (EZSP) firmware, 20 dBm out of the box and Thread potential.
Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.
One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.
A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.
Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.
649MDL
A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.
In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.
629
With two digital outputs and an Ethernet port, the Elite 2D-EXMU runs WLED on an ESP32 and drives two addressable-pixel strips from one controller, no hub.
Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.
A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.
Sixteen-amp relays run out of margin next to a storage water heater; the POWR320D carries up to 20 A with room to spare and logs every kilowatt-hour of heating, hour by hour.
One Duo module behind a double rocker runs both lighting lines at once — chandelier and sconce keep their own wall keys yet switch independently via app or voice, 10 A per channel.
599
Behind the shutter buttons already on your wall, MINI-RBS slips into the round Ø60 mm flush box and gives the motor schedules, percentage control and Matter.
599
The smart layer hides flush in the wall: the WS01TPF-E replaces a regular socket in its mounting box, joins any Matter ecosystem over Wi-Fi and meters loads up to 16 A.
599MDL
To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.
Two digital outputs on an ESP32 with WLED pre-flashed: the GL-C-615WL drives two addressable strips over Wi-Fi from the WLED UI, no gateway.
Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.
Smoothly dims mains-voltage dimmable lamps over Zigbee: an existing halogen or LED fixture gains flicker-free brightness control, with no LED strip involved.
Chase, rainbow and per-pixel effects on a WS281x addressable strip, run from Smart Life through a Tuya ZigBee gateway: two SPI outputs, 15 A.
At the heart of a Xiaomi smart home, this hub unites Zigbee 3.0, Bluetooth and Wi-Fi sensors and lights in one app, with Apple HomeKit support.
Two imou CE2P Matter-over-Wi-Fi plugs, 16 A each, with energy metering: they join Apple Home, Google Home, Alexa and Home Assistant directly, no hub.
499
A 24GHz mmWave presence radar that sees you even while you sit still, with a light sensor and IR blaster, running locally over Wi-Fi and MQTT in Home Assistant.
Learns the 433MHz RF remotes of blinds, sockets and switches and brings them into Home Assistant over Wi-Fi through RF2MQTT, no cloud.
499MDL