Devices for local smart homes

Sonoff SwitchMan M5 Matter smart wall switch, 3-gang, 86 type, white

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.

Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.

A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.

In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.

Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.

A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.

One Duo module behind a double rocker runs both lighting lines at once — chandelier and sconce keep their own wall keys yet switch independently via app or voice, 10 A per channel.

Behind the shutter buttons already on your wall, MINI-RBS slips into the round Ø60 mm flush box and gives the motor schedules, percentage control and Matter.

The smart layer hides flush in the wall: the WS01TPF-E replaces a regular socket in its mounting box, joins any Matter ecosystem over Wi-Fi and meters loads up to 16 A.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.

Smoothly dims mains-voltage dimmable lamps over Zigbee: an existing halogen or LED fixture gains flicker-free brightness control, with no LED strip involved.

Chase, rainbow and per-pixel effects on a WS281x addressable strip, run from Smart Life through a Tuya ZigBee gateway: two SPI outputs, 15 A.

At the heart of a Xiaomi smart home, this hub unites Zigbee 3.0, Bluetooth and Wi-Fi sensors and lights in one app, with Apple HomeKit support.

Two imou CE2P Matter-over-Wi-Fi plugs, 16 A each, with energy metering: they join Apple Home, Google Home, Alexa and Home Assistant directly, no hub.

Sonoff's screen sensor enters a new generation: the AirGuard TH fits daily highs, lows and a second sensor's readings on its 3.6-inch LCD, and Proximity mode needs no hub at all.

A motionless reader is invisible to PIR — the SNZB-06P's 5.8 GHz radar tracks breathing instead, keeping lights on while you stay put. Automations run through a Zigbee 3.0 hub.

At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.

On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.

A frozen router gets power-cycled without touching the plug: Sonoff ZBMicro switches the USB power line over Zigbee 3.0 and passes up to 4.6 A for 5-volt gadgets.

Adding an S60ZBTPF strengthens a Zigbee network twice over: the plug routes mesh traffic for nearby devices while switching loads up to 16 A with energy metering.

A 2 m sensing cable slides under the washer or behind the boiler where the round sensor cannot fit, picking up water along its whole braid while the SNZB-05P stays dry.

A GU10 Zigbee 3.0 spotlight bulb with RGB plus tunable 2200–6500K white that screws straight into a 230 V GU10 socket and runs off any Zigbee hub.