CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
CasaSmart picks
Active filters

Pipeline methane near a gas hob can leak before you smell it — this Moes Zigbee sensor catches it at 8% LEL, sounds at 70 dB and alerts the phone.

The steel probe on its 1.5 m lead takes the cold and the liquid; the IP65 body with the LCD stays dry. The SNZB-02LD reads −40 to +115 °C — add a Zigbee 3.0 gateway for alerts.
699MDL
Shower steam and balcony frost are exactly where the SNZB-02WD belongs: an IP65 case, a −20 to +60 °C range and a 2.2″ LCD; automations come alive once a Zigbee 3.0 hub joins.
699MDL
Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.
679MDL
A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.
659MDL
Two Star Ring halos glow side by side in the dark and tell at a glance which key lights which zone: white glass, two 10A relays on Zigbee 3.0, with or without neutral.
649MDL
Hallway and room — two light lines on an old two-key point: the ZS-SR-EU2 makes them Zigbee with no neutral and no new chases, behind a grey Star Ring halo.
649MDL
Red Dot 2023 design holds two light zones on a white frame: neutral required for flicker-free LED switching, a Star Ring halo and Zigbee 3.0 via a hub.
629MDL
Two light zones on a firm neutral (L+N): each key switches cleanly, no LED flicker and no dim glow when off, on a grey panel with the Star Ring halo.
629MDL
A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.
629MDL
A grey glass panel with a glowing ring shows the level, and holding a button dims the light smoothly through a Tuya Zigbee gateway — for dimmable LEDs up to 200 W.
629MDL
Screws onto the radiator valve and gives each room its own heating schedule — Zigbee 3.0 through a Tuya gateway, cutting winter gas waste.
599MDL
On a white bathroom wall, the white Star Ring switch handles a 20A 4000W heater, counts every kWh and cuts the line on both poles at the first fault.
599MDL
A 3 kW heater overloads an ordinary 10A smart relay; the ZS-SR-EUB holds 20A / 4000W, breaks both poles and meters the kilowatts live over Zigbee.
599MDL
Stick it on a wall with no socket and no electrician: two sensors, mmWave plus PIR, kill the false triggers a lone infrared detector keeps firing.
599MDL
Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.
599MDL
A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.
599MDL
Zigbee sensors and automations without a server or Home Assistant: the ZBBridge-P brings up to 128 devices into the eWeLink app over 2.4 GHz Wi-Fi — no Ethernet port.
599MDL
The Star Ring glows softly in the dark, so the key is found on the first reach: minimalist white glass, a 10A relay on Zigbee 3.0, with or without neutral.
549MDL
Back box with only line and a wire to the fixture? The ZS-SR-EU1 fits without a neutral too: a 10A Zigbee Star Ring switch with a grey halo.
549MDL
A 10W ZigBee recessed spot with a 132mm face: tunable 2700K-6500K white plus RGB, brighter light for a kitchen or larger room, via a Tuya gateway.
549MDL
The white Star Ring in-wall Zigbee socket meters every watt the load behind it draws and switches up to 16 A — 3500 W at 230 V — straight from scenes.
549MDL
Grey in-wall Zigbee socket that measures in real time what the boiler, AC or fridge draws and cuts standby on a schedule.
549MDL
Movie night starts before the phone is found — one press on the Orb 4-In-1 fires the whole scene. Four buttons, up to 16 commands; pair it with a Zigbee or eWeLink-Remote gateway.
549MDL