Devices for local smart homes

Smlight SLZB-06p10 Zigbee + Thread coordinator on CC2674P10, PoE

The multiprotocol TI CC2674P10 radio with an ESP32-S3 host makes the SLZB-06p10 a coordinator that switches in firmware between Zigbee 3.0 and Thread, over Ethernet or USB-C.

Built on the EFR32MG24, the SLZB-06Mg24 runs Zigbee 3.0 and Thread on one radio, so your Home Assistant network reaches Matter-over-Thread too, not just Zigbee.

Built on the Silicon Labs EFR32MG21, the SLZB-06M is the 06-family pick for those on the Silabs stack — ZHA or deCONZ — with USB-C, Ethernet and PoE at once.

Smlight's original Zigbee 3.0 coordinator on the TI CC2652P, with USB-C, Ethernet and PoE: one device bridges your Zigbee mesh to Z2M or ZHA.

Frameless white matte glass with floating full-touch across the whole face: one plate runs four light lines through the home Zigbee gateway.

Four separate loads on one grey plate by the door: hallway light, stairs, terrace and a sconce each run their own line through a Zigbee gateway, no four-frame wall.

An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.

Touch the faceplate on the wall and the warm LEDs glide down for dinner: the MINI-ZBDIM-E swaps the old switch for a complete Zigbee dimmer, no hidden module buried in the box.

With an IC behind every one of its 150 LEDs, the Sonoff L3 Pro shows several colours at once and runs chasing gradients along all 5 metres — the 5V adapter is sold separately.

The scenario is simple: on a leak-sensor alert the hub shuts the SWV-BSP valve, and on schedule it opens garden watering for a set water volume — all over Zigbee 3.0.

Sonoff TRVZB smart Zigbee 3.0 radiator valve with heating schedules, open-window detection, child lock and frost protection, controlled via eWeLink and Home Assistant.

Covers the whole flat with dual-band Wi-Fi 5 up to 1167 Mbps, 4 antennas, 3 Gigabit ports and Mi WiFi app control.

Three light lines in one room go under a single matte-glass white panel: pull the tired triple switch and screw in a Zigbee mechanism, with no new chasing.

Three light lines of an open kitchen-living sit on one grey feather-textured frame: ceiling, spots and table, each on its own touch key.

Carbon monoxide from a gas boiler or stove has no smell — this Moes Zigbee detector catches it early, sounds above 85 dB and pushes an alert to the phone.

Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.

An old Chișinău flat leaves only the live and two load wires in the switch box, no neutral at all — the MINI-ZB2GS-L-E drops a glass Zigbee panel onto exactly that.

Covers a flat with dual-band Wi-Fi 6 — 1201 Mbps on 5 GHz plus 300 Mbps on 2.4 GHz, four Gigabit ports and four antennas.

A smoulder in a bedroom at night barely wakes anyone — this Moes photoelectric sensor screams above 85 dB and, via a gateway, pushes the alert to the phone too.

A tap switches the light, a long-press on the same key fires a whole-room scene: two white zones on an 86 mm frame, Zigbee 3.0, matte glass.

Your finger feels every press: a short, four-level adjustable buzz confirms the command in the dark, while two grey zones run the ceiling light and the wall sconce apart.

Work at a desk for hours, barely moving: the 24GHz radar keeps you "present", with fine distance zones that crop the doorway behind you.

Add one more repeater to your Zigbee mesh: wired with neutral, the ZBM5 relays the network and answers a local Home Assistant — no cloud, no account.

Pull off the white rocker that ten years of fingers turned yellow and the MINI-ZB2GS-E glass panel takes its place: two Zigbee 3.0 channels, neutral required.