Devices for local smart homes

Moes Star Ring ZRS-SR-EUC white Zigbee+RF curtain switch 3A

On a matte-white wall the curtain switch all but vanishes: white star-ring key, percentage opening and RF 433 MHz over Zigbee 3.0, rated 3A/600W.

Moes ZS-SR-EUC Zigbee+RF Star Ring curtain wall switch, grey

The motorized curtain you ran from a misplaced remote gets a wall of its own: a grey Star Ring glass panel with open/pause/close, percentages and 433 MHz RF.

Pipeline methane near a gas hob can leak before you smell it — this Moes Zigbee sensor catches it at 8% LEL, sounds at 70 dB and alerts the phone.

The steel probe on its 1.5 m lead takes the cold and the liquid; the IP65 body with the LCD stays dry. The SNZB-02LD reads −40 to +115 °C — add a Zigbee 3.0 gateway for alerts.

Shower steam and balcony frost are exactly where the SNZB-02WD belongs: an IP65 case, a −20 to +60 °C range and a 2.2″ LCD; automations come alive once a Zigbee 3.0 hub joins.

The 43 mm body with its tilting antenna takes just one server USB port, and the bundled 0.5 m extension keeps the coordinator radio clear of USB 3.0 noise.

Dozens of Zigbee devices in Zigbee2MQTT or ZHA on a single stick: the TI CC2652P coordinator with +20 dBm output holds up to 200 nodes and reflashes into a router.

Unlike the ZBDongle-P built on the TI CC2652P, revision E runs a Silicon Labs EFR32MG21 with EmberZNet (EZSP) firmware, 20 dBm out of the box and Thread potential.

Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.

A 2024-built flat has a two-gang switch but no blue wire in the box — the MINI-ZB2GS-L makes both lighting lines smart without a neutral, over Zigbee.

Two Star Ring halos glow side by side in the dark and tell at a glance which key lights which zone: white glass, two 10A relays on Zigbee 3.0, with or without neutral.

Hallway and room — two light lines on an old two-key point: the ZS-SR-EU2 makes them Zigbee with no neutral and no new chases, behind a grey Star Ring halo.

Red Dot 2023 design holds two light zones on a white frame: neutral required for flicker-free LED switching, a Star Ring halo and Zigbee 3.0 via a hub.

Two light zones on a firm neutral (L+N): each key switches cleanly, no LED flicker and no dim glow when off, on a grey panel with the Star Ring halo.

A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.

A grey glass panel with a glowing ring shows the level, and holding a button dims the light smoothly through a Tuya Zigbee gateway — for dimmable LEDs up to 200 W.

Screws onto the radiator valve and gives each room its own heating schedule — Zigbee 3.0 through a Tuya gateway, cutting winter gas waste.

On a white bathroom wall, the white Star Ring switch handles a 20A 4000W heater, counts every kWh and cuts the line on both poles at the first fault.

A 3 kW heater overloads an ordinary 10A smart relay; the ZS-SR-EUB holds 20A / 4000W, breaks both poles and meters the kilowatts live over Zigbee.

Stick it on a wall with no socket and no electrician: two sensors, mmWave plus PIR, kill the false triggers a lone infrared detector keeps firing.

Thirty Wi-Fi clients on the family router are plenty — this Duo keeps both lighting lines off the 2.4 GHz band, runs them over Zigbee and relays the mesh as a router.

A Zigbee sensor flags an overheating room and the shutter glides down by itself: MINI-ZBRBS hides behind the existing wall switch and runs its automation locally, no cloud needed.

The Star Ring glows softly in the dark, so the key is found on the first reach: minimalist white glass, a 10A relay on Zigbee 3.0, with or without neutral.

Back box with only line and a wire to the fixture? The ZS-SR-EU1 fits without a neutral too: a 10A Zigbee Star Ring switch with a grey halo.