Devices for local smart homes

Huawei WiFi AX3 (WS7100-25) Quad-Core Wi-Fi 6 Router, White

Dual-band Wi-Fi 6 Plus router with Quad-Core 1.4 GHz CPU, up to 2976 Mbps, four Gigabit ports, four antennas and mesh support.

A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.

When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.

Watches your gate and yard in 2.5K, with 350° pan, full-color night vision and an IP66 shell rated down to -30°C.

The Sonoff camera with a wired port: Ethernet and RTSP deliver a stable feed to an NVR or Home Assistant, while 340°/120° rotation and 15 m IR range cover the whole room.

The newest Silabs EFR32MG26 chip with the most memory in the 06 series makes the SLZB-06Mg26 a Zigbee, Thread and Matter coordinator on one board.

Schedules a warm floor across 42 weekly slots and answers Matter locally from Apple Home, Google Home and Alexa — no separate Tuya hub, just WiFi.

The SLZB-06p7 Zigbee coordinator on the CC2652P7 chip, with a +20dB amp and +5dB antenna, holds a large whole-house mesh over Ethernet, PoE or USB.

The multiprotocol TI CC2674P10 radio with an ESP32-S3 host makes the SLZB-06p10 a coordinator that switches in firmware between Zigbee 3.0 and Thread, over Ethernet or USB-C.

Built on the EFR32MG24, the SLZB-06Mg24 runs Zigbee 3.0 and Thread on one radio, so your Home Assistant network reaches Matter-over-Thread too, not just Zigbee.

Built on the Silicon Labs EFR32MG21, the SLZB-06M is the 06-family pick for those on the Silabs stack — ZHA or deCONZ — with USB-C, Ethernet and PoE at once.

Smlight's original Zigbee 3.0 coordinator on the TI CC2652P, with USB-C, Ethernet and PoE: one device bridges your Zigbee mesh to Z2M or ZHA.

Four Matter 16A plugs in one box: a single kit covers the boiler, heater, office and kitchen of a whole home, each with its own energy meter.

Fires your gas or water boiler on a 42-slot schedule and by voice from Apple Home, Google Home and Alexa — no hub, just WiFi.

Guests and kids dim the light with a real button on the wall — the round Orb-DIM panel replaces the old switch, while app, voice and 1% scene control stay there for you.

Covers the whole flat with dual-band Wi-Fi 5 up to 1167 Mbps, 4 antennas, 3 Gigabit ports and Mi WiFi app control.

Covers a flat with dual-band Wi-Fi 6 — 1201 Mbps on 5 GHz plus 300 Mbps on 2.4 GHz, four Gigabit ports and four antennas.

Replace a worn double switch outright instead of hiding a relay behind it — the Orb-MW2 panel lands on the wall complete, with two independent 10 A channels.

A worn-out roller shutter button deserves replacing outright, and the Orb-RBS does exactly that — a finished 86×86 wall switch with physical up/down keys and Matter over Wi-Fi.

Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.

In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.

One Duo module behind a double rocker runs both lighting lines at once — chandelier and sconce keep their own wall keys yet switch independently via app or voice, 10 A per channel.