Devices for local smart homes

Sonoff B05-BL-A60 smart Wi-Fi RGBCW LED bulb E27 9 W 806 lm

The extra money over the white B02-BL buys exactly one thing — a 16-million-colour palette on top of the same 9 W, 806 lm tunable 2700–6500 K white.

Sonoff B02-F-A60 smart Wi-Fi LED filament bulb E27 7 W 806 lm

Of the two Sonoff filament bulbs, the A60 is the everyday one: classic pear shape, 806 lm versus 700 lm on the ST64, and cool white up to 6500 K.

Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.

Five minutes after unboxing, this 16 A plug sits between the wall socket and your heater, runs schedules and counts watts over the router you already own.

No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.

Original washable mop cloth for the Xiaomi Mi Robot Vacuum-Mop Essential (MJSTG1) robot. Reusable, machine-friendly.

Stretches your existing Wi-Fi into dead zones: plugs straight into a socket, 2.4 GHz, up to 300 Mbps, two antennas.

Lights up on its own the moment you walk past in the dark: 120° motion sensor, warm 2800K glow and setup from the Xiaomi Home app.

A large LCD shows room temperature and humidity at a glance, driven by a Sensirion sensor and paired over Bluetooth to the Xiaomi Home app.

Passive PoE splitter that turns one 802.3af line into two outputs and carries data plus power another 100 m — to power SLZB-06 coordinators where there is no socket.

Sat under the sink or by the washer, the ZWS16 senses the first drops, sounds a local alarm and pushes a phone alert through a Zigbee gateway.

Countless DIY smart homes began with a cheap Sonoff Basic relay. The fifth generation keeps that recipe — one 10 A line, nothing extra — and now speaks Matter.

When an ordinary bulb burns out, screw this one into the same E27 socket and the room gains scheduled warm-to-cool white, a gentle wake-up light and phone control — no hub needed.

Xiaomi N300 Wi-Fi repeater: 2.4 GHz, up to 300 Mbps, 2 external antennas. Extends your home network coverage, set up from the Mi Home app in a couple of minutes.

A handheld touch-ring remote that drives six Gledopto RGB+CCT zones directly over 2.4G RF — no hub, no app, on two AAA batteries.

On a bedside table, a reception desk or a kitchen counter, the white StandW stand in flame-retardant PC V0 plastic keeps an NSPanel or NSPanel Pro at hand in light interiors.

No drilling, no tools: clip your NSPanel or NSPanel Pro onto this dim-gray flame-retardant PC V0 stand in minutes and the panel becomes a tabletop device.

Turns itself on when the room goes dark and off in daylight via its built-in sensor. Soft 2 lm warm glow, 2500 K, 0.5 W, straight into the socket.

Two independent circuits behind one double switch: the WSM16-W2 joins Smart Life over 2.4 GHz Wi-Fi directly, with no hub.

A single-channel Zigbee 3.0 relay that hides in the back-box behind the key and keeps the light on a local mesh through a Tuya Zigbee gateway, off the home Wi-Fi.

Rain hitting a Sonoff relay outdoors? The PC V0 Waterproof Box R2 (152×100×48 mm) shields the module from splashes, dust and knocks, no formal IP.

For Zigbee2MQTT experiments and a small network of up to ~20 devices this legacy CC2531 dongle still does the job — no external antenna, firmware updates need a programmer.

Clips into an 86-type back box or a 60 mm EU round box without tools, turning the no-neutral Zigbee ZBMINIL2 module into a button wall switch.

Wall switch enclosure for Sonoff ZBMINIR2, MINIR4M and MINIR4 modules (neutral): white fire-retardant PC, clip-on mount in 86-type or Ø60 mm round boxes.