Devices for local smart homes

Sonoff SNZB-01P Zigbee wireless switch button, 3 actions

No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.

Avatto ZWS16 Zigbee water leak sensor IP66 with local siren

Sat under the sink or by the washer, the ZWS16 senses the first drops, sounds a local alarm and pushes a phone alert through a Zigbee gateway.

Countless DIY smart homes began with a cheap Sonoff Basic relay. The fifth generation keeps that recipe — one 10 A line, nothing extra — and now speaks Matter.

A handheld touch-ring remote that drives six Gledopto RGB+CCT zones directly over 2.4G RF — no hub, no app, on two AAA batteries.

A single-channel Zigbee 3.0 relay that hides in the back-box behind the key and keeps the light on a local mesh through a Tuya Zigbee gateway, off the home Wi-Fi.

Hides in the box behind your existing switch and makes the light smart over Wi-Fi straight to Tuya — no hub, no new key, no wall work.

Stick the two halves on the door and frame: the moment the door or window opens, the ZDS16 sends a Zigbee alert to your phone.

A watering valve on a schedule, a heater on a timer, garage lighting from your phone — the BASICR4 covers these first automation jobs with one 10 A channel at minimal cost.

Two-channel Z-Wave DIN-rail dimmer with trailing-edge technology, power metering and 200 W per channel. A Z-Wave hub is required for remote control.

Z-Wave Long Range DIN-rail relay with 3 potential- channels rated 16 A each (48 A total), Z-Wave 800 series, 110-240 V; a Z-Wave controller is required.

Z-Wave DIN-rail controller for roller shutters, blinds and awnings with two 16 A channels, energy metering, and a required Z-Wave hub.

Z-Wave DIN-rail relay with 2 channels, 16 A per channel and 25 A total, plus built-in power metering on each circuit. A compatible Z-Wave gateway is required.

Two-channel Z-Wave 800 DIN-rail relay, 16 A per channel, potential- contacts and S2 security. A Z-Wave hub is required to operate it.

Single-channel Z-Wave DIN-rail relay rated to 16 A with built-in power metering. Needs a Z-Wave hub and electrician install inside the panel.

Professional Z-Wave DIN-rail relay, single channel with dry contact up to 16 A for breaker-box mounting. A compatible Z-Wave gateway is required.

Outdoor Z-Wave Long Range Shelly plug with IP44 protection, load up to 12 A (2500 W) and accurate energy metering. Requires a Z-Wave hub; built for gardens, terraces and balconies.

The compact Shelly Wave Plug S Z-Wave plug switches loads up to 12 A and meters energy in kWh. It operates only through a Z-Wave hub.

Compact black Shelly Z-Wave Long Range plug with power and energy metering up to 12 A (2500 W). Control appliances and track consumption through a Z-Wave hub.

Shelly Wave Motion LR PIR sensor on Z-Wave 800 with Long Range coverage, built-in light sensor and a CR2477 battery lasting up to three years.

Shelly Wave H&T Z-Wave Long Range temperature and humidity sensor on a CR123A battery with up to two years autonomy; needs a compatible Z-Wave hub.

Z-Wave Long Range contact sensor for doors and windows with open and tilt detection plus a light sensor, powered by one CR2032 battery for up to two years.

Shelly Wave Plug UK Z-Wave smart plug (BS1363) with power metering up to 13 A and overheating protection, managed through a Z-Wave hub.

Miniature Z-Wave module that meters electrical consumption up to 16 A, with no switching. Needs a Z-Wave hub and fits inside a wall box.

Miniature Z-Wave Long Range relay with one 8 A channel and power metering, adding existing appliances to a Z-Wave network through a compatible hub.