Verified compatibility
We test every device for these ecosystems. For non-standard integrations contact us before ordering.
- Home Assistant
- Zigbee
- Matter
- KNX
- Wi-Fi
Compatibility
Works with these ecosystems
Ecosystems
- Home Assistant
- Samsung SmartThings
What it is, who it's for, what it does
About this product
Shelly Wave Plug UK turns any BS1363 British wall socket into an intelligent control point for household appliances. It switches loads up to 13 A (3000 W resistive) and measures power, voltage and current in real time, so you can see exactly how much each connected device draws.<br><br>Communication runs over Z-Wave at 868.4 MHz with S2 security and SmartStart, and the plug also acts as a network repeater, extending the mesh coverage across the home. Overheating, overcurrent and overvoltage protections stay always active, while the LED ring shows the appliance state.<br><br>A certified Z-Wave controller (hub) is required for operation and is not included. Once added to the network, the plug can join automation scenes, time schedules and voice control through compatible gateways.
- DeliveryFree from 1500 MDL
- Returns30 days to return
- Warranty24 months
15+projects delivered300+devices installed3 yearslocal-first experienceChișinăushowroom Columna 153Book a showroom visit →
CasaSmart essentials
What it works with, what it needs, what you can do
Install & requirements
What you need on your side and what we deliver.
- Zigbee hub or Matter gateway for wireless variants
- 65 mm back-box or DIN panel for wired variants
- Local setup on Home Assistant — included in install
Smart scenarios
Three typical automations we set up after the install.
- 01Morning: warm light + blinds up + climate at 22 °C
- 02Leaving: lights off, arm sensors, close the gas
- 03Evening: warm ambient + cinema scene
Where it works
Use cases
A Chisinau apartment watches an electric heater's draw in winter to keep costs under control.
Track in real time the power drawn by an electric heater or fridge connected through the plug.
The living-room TV and console fully power down at 23:00 via a Z-Wave hub scene.
Schedule appliances to switch off at night to cut standby consumption.
A hallway plug reinforces the link to door sensors in a house with thick walls.
Use the plug as a repeater to strengthen the signal to battery sensors in distant rooms.
For the installerTechnical specificationsfull spec · wiring · datasheet
For the installer
Technical specifications
full spec · wiring · datasheet
Other
- Protocol
- Z-Wave
- Z-Wave frequency
- 868.4 MHz
- Z-Wave security
- S2 (authenticated/unauthenticated), SmartStart
- Indoor range
- up to 40 m
- Supply voltage
- 230 (±10%), 50/60 V / Hz
- Max switching current
- 13 A
- Max power (resistive)
- 3000 W
- Power metering
- Yes (power, voltage, current)
- Protections
- Overheating, overcurrent, overvoltage (always on)
- Plug type
- BS 1363 (Type-G)
- Dimensions
- 60x60x56 mm
- Weight
- 74 g
- Operating temperature
- -20 to 40 °C
Support
Frequently asked questions
Does the Shelly Wave Plug UK need a Z-Wave hub?
Yes. As a Z-Wave device, the plug strictly requires a certified Z-Wave controller/gateway for configuration and operation. The hub is not included and is purchased separately.What is the plug's maximum load?
The plug switches up to 13 A, equivalent to about 3000 W on resistive loads at 230 V. Overcurrent and overheating protections stay always active.What Z-Wave frequency does it use?
The UK version for Europe operates on the 868.4 MHz Z-Wave frequency, with S2 security and quick onboarding via SmartStart using the device DSK key.Can the plug measure energy consumption?
Yes. Shelly Wave Plug UK reports the connected appliance's power, voltage and current in real time, enabling consumption tracking and energy-saving automations.Which gateways is it compatible with?
The plug is a standard Z-Wave Plus device compatible with certified Z-Wave controllers, including Home Assistant and SmartThings based solutions. The CasaSmart team can recommend a suitable setup.Does the plug work as a network repeater?
Yes. Being permanently mains-powered, the plug relays the Z-Wave signal and extends mesh coverage, helping battery sensors located further from the controller stay connected.
Same ecosystem
Works together
Devices that run in the same smart-home ecosystem.
Shelly
Shelly Wave Pro Dimmer 2PM Z-Wave 2-Channel DIN Dimmer Metering
—
Shelly
Shelly Wave Pro Dimmer 1PM Z-Wave DIN-rail dimmer with metering
—
Shelly
Shelly Wave PRO 3 LR – Z-Wave DIN 3-channel relay 16A
—
Shelly
Shelly Wave Pro Shutter - Z-Wave DIN-rail roller shutter and blind controller
—
Shelly
Shelly Wave PRO 2PM Z-Wave 2-channel DIN-rail relay with metering
—
Shelly
Shelly Wave Pro 2 - Z-Wave 2-channel DIN-rail relay
—
Same category
Similar products
Close models and alternatives from the CasaSmart catalog.
IMOU
imou CE2P 4-pack smart plug Matter 16A with energy monitoring, white
899MDL
Sonoff
Sonoff Orb Socket WS01TPF-E Matter in-wall smart socket Type F
599MDL
Moes
Moes Star Ring ZK-SR-EU Zigbee in-wall socket 16A energy monitor, white
549MDL
Moes
Moes Star Ring Zigbee in-wall socket with energy meter 16A, grey
549MDL
IMOU
imou CE2P Matter Wi-Fi smart plug 16A with energy monitoring, 2-pack
499MDL
Sonoff
Sonoff S60ZBTPF iPlug Zigbee smart plug 16 A with energy monitoring
449MDL
Manager guidance
Questions about this product?
A CasaSmart manager calls you within 1–2 working hours and answers anything — compatibility, install, alternatives.
+373 60 944 922Updated: · reviewed by CasaSmart Expert Team