CasaSmart catalog
Devices for local smart homes
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
Home Assistant
Zigbee
Matter
Local-firstOfficial import64 products
Active filters
64 products
CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
64 products
Active filters
1,999MDL
-1600x1600.avif)
The white version of the NSPanel Pro: same 3.95" screen and Zigbee 3.0 hub as the black one, differing only by its white frame for light-coloured walls.
A local Zigbee 3.0 plus Wi-Fi hub in one touch panel: add Sonoff sensors and relays directly, run them from the screen and sync with Home Assistant.
Via the built-in Matter bridge, Zigbee sensors and relays show up in Apple Home, Google Home, Alexa and SmartThings; Ethernet RJ45 or 2.4 GHz Wi-Fi, up to 256 sub-devices.
Fits a standard 86 mm back box but needs a neutral in the wall: the white NSPanel replaces an ordinary switch with two relays and a 3.5" touchscreen.
Unlike a single-gang switch, NSPanel drives two independent circuits from one 3.5" touchscreen and fires whole-room scenes with a single tap.
That heavy-headed feeling after hours in a closed room usually points to CO2 build-up, and the AirGuard CO2 tracks it with an NDIR sensor refreshing every 5 seconds.
1,499
When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.
One unbroken five-metre run lights a whole hallway, a wall-to-wall balcony or a ceiling cove, and the IP65 coating lets the Sonoff L2 keep working where splashes happen.
An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.
Touch the faceplate on the wall and the warm LEDs glide down for dinner: the MINI-ZBDIM-E swaps the old switch for a complete Zigbee dimmer, no hidden module buried in the box.
Guests and kids dim the light with a real button on the wall — the round Orb-DIM panel replaces the old switch, while app, voice and 1% scene control stay there for you.
899
With an IC behind every one of its 150 LEDs, the Sonoff L3 Pro shows several colours at once and runs chasing gradients along all 5 metres — the 5V adapter is sold separately.
The scenario is simple: on a leak-sensor alert the hub shuts the SWV-BSP valve, and on schedule it opens garden watering for a set water volume — all over Zigbee 3.0.
Sonoff TRVZB smart Zigbee 3.0 radiator valve with heating schedules, open-window detection, child lock and frost protection, controlled via eWeLink and Home Assistant.
Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.
An old Chișinău flat leaves only the live and two load wires in the switch box, no neutral at all — the MINI-ZB2GS-L-E drops a glass Zigbee panel onto exactly that.
Pull off the white rocker that ten years of fingers turned yellow and the MINI-ZB2GS-E glass panel takes its place: two Zigbee 3.0 channels, neutral required.
The cheapest moment to make shutters smart is while walls are still open: Orb-ZBRBS drops a Zigbee panel with key, percentages and scenes into a standard 86×86 box.
An evening dim-to-30% runs entirely inside the Zigbee mesh — no Wi-Fi, no cloud: the MINI-ZBDIM takes commands straight from the coordinator and relays the network as a router.
Replace a worn double switch outright instead of hiding a relay behind it — the Orb-MW2 panel lands on the wall complete, with two independent 10 A channels.
749
A worn-out roller shutter button deserves replacing outright, and the Orb-RBS does exactly that — a finished 86×86 wall switch with physical up/down keys and Matter over Wi-Fi.
749
Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.
Kitchen thermometer with two stainless probes rated to 300 °C, its own display and Bluetooth monitoring in the eWeLink app, with an alert when the target temperature is reached.
The steel probe on its 1.5 m lead takes the cold and the liquid; the IP65 body with the LCD stays dry. The SNZB-02LD reads −40 to +115 °C — add a Zigbee 3.0 gateway for alerts.