Devices for local smart homes

Moes Star Feather ZS-SF-EU4 Zigbee wall switch, 4-gang, grey

Four separate loads on one grey plate by the door: hallway light, stairs, terrace and a sconce each run their own line through a Zigbee gateway, no four-frame wall.

Sonoff SwitchMan ZBM5-3C Zigbee wall switch, 3-gang, 86 type, white

An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.

Two lighting circuits share one glass face: each channel gets its own touch field, a swipe fires a scene, and the RGB edge keeps glowing as a guide after dark.

Three light lines of an open kitchen-living sit on one grey feather-textured frame: ceiling, spots and table, each on its own touch key.

Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.

An old Chișinău flat leaves only the live and two load wires in the switch box, no neutral at all — the MINI-ZB2GS-L-E drops a glass Zigbee panel onto exactly that.

The whole panel works as one button: the TX Ultimate switches at a touch anywhere on the glass — an elbow nudge with full hands counts — and answers with light and a chime.

Add one more repeater to your Zigbee mesh: wired with neutral, the ZBM5 relays the network and answers a local Home Assistant — no cloud, no account.

Pull off the white rocker that ten years of fingers turned yellow and the MINI-ZB2GS-E glass panel takes its place: two Zigbee 3.0 channels, neutral required.

Replace a worn double switch outright instead of hiding a relay behind it — the Orb-MW2 panel lands on the wall complete, with two independent 10 A channels.

Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

One dim-gray plate runs the whole kitchen evening — ceiling light for cooking, the dining lamp for dinner, an under-cabinet strip for late tea, each on its own key and schedule.

Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.

In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.

Hallway and bathroom light from one point by the door: each of the two keys runs its own zone on its own schedule, and the dim-gray 86×86 panel replaces the old double switch.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Where graphite sockets and black handles set the palette, the dim-gray M5 finally blends in — and an eWeLink home keeps schedules and voice control without paying for Matter.

Two independent circuits behind one double switch: the WSM16-W2 joins Smart Life over 2.4 GHz Wi-Fi directly, with no hub.

A single-channel Zigbee 3.0 relay that hides in the back-box behind the key and keeps the light on a local mesh through a Tuya Zigbee gateway, off the home Wi-Fi.

Hides in the box behind your existing switch and makes the light smart over Wi-Fi straight to Tuya — no hub, no new key, no wall work.

Wireless 4-button switch on a CR2032 battery with Bluetooth and an adapter for Gira and Merten frames. Up to 16 actions, no wiring or wall chasing needed.

Wireless four-button Bluetooth (BLE) switch powered by a CR2032 battery, bundled with an adapter for Legrand Niloe and Shelly frames. Installs without wiring or wall chasing.

Wireless 4-button BLE switch on battery, bundled with a Busch-Jaeger frame adapter: no wiring, 16 actions and up to 2 years of life.