Devices for local smart homes

Xiaomi Solar Outdoor Camera BW400 Pro Set (camera + base station)

Mount it anywhere outdoors — runs wireless on a 10000 mAh battery with solar panel, IP66 weatherproofing and 2.5K video. Base station included.

Two 5MP lenses in one PoE body: a fixed one for the wide shot and a pan-tilt one that tracks and zooms — the whole yard and a close-up on a single cable.

An 18-channel NVR with 8 built-in PoE ports: one recorder for a shop, a warehouse or a large house, with a 16 TB HDD bay and 4K output.

The Wi-Fi 6 take on the N110 recorder: pairs up to 10 imou cameras over the air, no cable run to each, and records locally to an HDD.

A 10-channel network recorder that writes any ONVIF/RTSP camera to its own disk up to 16TB, with 4K HDMI out — and no monthly subscription.

The PS7F 5MP outdoor PoE camera pans 355° and tilts 0–90°, auto-tracks motion and sees in colour at night up to 30 m — all over a single Ethernet cable.

The 4K take on the PS3E bullet: an 8 MP sensor reads plates and faces at range where the 5 MP only shows a shape, over PoE and ONVIF.

Via the built-in Matter bridge, Zigbee sensors and relays show up in Apple Home, Google Home, Alexa and SmartThings; Ethernet RJ45 or 2.4 GHz Wi-Fi, up to 256 sub-devices.

Brings Wi-Fi 7 dual-band BE3600 (up to 3600 Mbps) home: 4 antennas, a 2.5G port, HUAWEI Mesh+ and setup via the AI Life app.

Where no internet reaches — a gate, a field, a building site — the Cruiser SC 4G streams over a 4G/LTE nano-SIM, with no Wi-Fi, in 5MP, IP66, with spotlight and siren.

Single-cable outdoor PoE bullet: 5MP/3K, full-colour night with spotlight, IP67 and ONVIF — the workhorse for any NVR system.

A palm-sized fanless Linux mini-server: runs Home Assistant via MQTT and Zigbee2MQTT, with an onboard EFR32MG24 Zigbee/Thread radio and no separate Raspberry Pi.

One body packs two 4MP lenses — a fixed ~180° eye plus a 355° PTZ lens cover the yard in 2.5K, with full-colour night vision and IP66.

With USB Type-C and USB-to-TCP/IP passthrough, the SLZB-MR3U hands its two radios — CC2674P10 for Zigbee, EFR32MG24 for Thread — straight to the PC or server running Z2M.

Wi-Fi 7 dual-band with up to 3570 Mbps aggregate, a 2.5G port, 4 antennas and mesh for the whole flat.

Wi-Fi 6 Plus arrives at home — a dual-band 3000 Mbps router with 4 antennas, 4 Gigabit ports and up to 128 connected devices.

One network cable carries power and data: the Ranger Mini PS2M wires by PoE to an NVR, shoots 3K/5MP in colour at night and pans 355° — no crowded Wi-Fi.

Two radio SoCs in one box — CC2652P7 and EFR32MG21 — so the SLZB-MR1 runs a Zigbee network and a Thread network in parallel from a single PoE or USB-C coordinator.

Dual-band Wi-Fi 6 Plus router with Quad-Core 1.4 GHz CPU, up to 2976 Mbps, four Gigabit ports, four antennas and mesh support.

A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.

Watches your gate and yard in 2.5K, with 350° pan, full-color night vision and an IP66 shell rated down to -30°C.

The Sonoff camera with a wired port: Ethernet and RTSP deliver a stable feed to an NVR or Home Assistant, while 340°/120° rotation and 15 m IR range cover the whole room.

The newest Silabs EFR32MG26 chip with the most memory in the 06 series makes the SLZB-06Mg26 a Zigbee, Thread and Matter coordinator on one board.

If your mesh keeps growing, the EFR32MG24 with 1536 KB Flash and 256 KB RAM keeps up — and a reflash turns the dongle into a Thread or Matter radio.