CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
136 products
Active filters

299MDL

Lighting a whole flat takes a relay per light point, so unit price decides: the Wi-Fi MINIR4 Extreme keeps 10 A and Detach Relay while costing less than its Matter sibling.

A Wi-Fi IR remote that turns the TV, air conditioner and set-top box into Home Assistant entities locally via IR2MQTT — no cloud, no hub.

An MR16 G5.3 spotlight on 12–24V: the same lamp in a low-voltage track or fitting turns RGB plus tunable 2200–6500K white, run from any Zigbee 3.0 hub.

Catch the leak while it is still a drip — this floor sensor trips at just 0.5 mm of water and wakes your phone and the Zigbee hub siren before the screed soaks through.

Walk in and the light is already on: the SNZB-03P PIR fires within 5 seconds, covers 6 m at 110° and runs over 3 years on one CR2477 cell; automations live on a Zigbee 3.0 hub.

By day the SNZB-04P flips on the hallway light as the door opens; with the flat empty it turns guard and pushes an instant alert — automations call for a Zigbee 3.0 coordinator.

Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.

Five minutes after unboxing, this 16 A plug sits between the wall socket and your heater, runs schedules and counts watts over the router you already own.

No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.

Passive PoE splitter that turns one 802.3af line into two outputs and carries data plus power another 100 m — to power SLZB-06 coordinators where there is no socket.

Countless DIY smart homes began with a cheap Sonoff Basic relay. The fifth generation keeps that recipe — one 10 A line, nothing extra — and now speaks Matter.
249

A handheld touch-ring remote that drives six Gledopto RGB+CCT zones directly over 2.4G RF — no hub, no app, on two AAA batteries.

For Zigbee2MQTT experiments and a small network of up to ~20 devices this legacy CC2531 dongle still does the job — no external antenna, firmware updates need a programmer.

A 2 m USB-C probe that adds temperature and humidity readings to an eMotion Pro, Max or Ultra presence sensor — it does not work on its own.

Reads room temperature and humidity on a 1.5" LCD, powered by a Sensirion sensor with Bluetooth sync to the Xiaomi Home app.

A watering valve on a schedule, a heater on a timer, garage lighting from your phone — the BASICR4 covers these first automation jobs with one 10 A channel at minimal cost.