Devices for local smart homes

Roborock Saros Z70 Robot Vacuum with OmniGrip Mechanical Arm (Black)

The OmniGrip arm tidies objects under 300 g, while 22000 Pa suction and spinning mops handle the floor for you.

LinkNLink iSG Display Max touch hub: 10″ screen, built-in Home Assistant and Zigbee 3.0, Wi-Fi 2.4/5 GHz, Bluetooth, Matter — your whole smart home from one panel.

The white version of the NSPanel Pro: same 3.95" screen and Zigbee 3.0 hub as the black one, differing only by its white frame for light-coloured walls.

A local Zigbee 3.0 plus Wi-Fi hub in one touch panel: add Sonoff sensors and relays directly, run them from the screen and sync with Home Assistant.

Mount it anywhere outdoors — runs wireless on a 10000 mAh battery with solar panel, IP66 weatherproofing and 2.5K video. Base station included.

Fits a standard 86 mm back box but needs a neutral in the wall: the white NSPanel replaces an ordinary switch with two relays and a 3.5" touchscreen.

Unlike a single-gang switch, NSPanel drives two independent circuits from one 3.5" touchscreen and fires whole-room scenes with a single tap.

A palm-sized fanless Linux mini-server: runs Home Assistant via MQTT and Zigbee2MQTT, with an onboard EFR32MG24 Zigbee/Thread radio and no separate Raspberry Pi.

With USB Type-C and USB-to-TCP/IP passthrough, the SLZB-MR3U hands its two radios — CC2674P10 for Zigbee, EFR32MG24 for Thread — straight to the PC or server running Z2M.

Two radio SoCs in one box — CC2652P7 and EFR32MG21 — so the SLZB-MR1 runs a Zigbee network and a Thread network in parallel from a single PoE or USB-C coordinator.

A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.

Covers the whole room in 4K with 360° rotation: dual-motor gimbal, 940 nm night vision and two-way audio, all via Xiaomi Home.

When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.

Bedside clock with a 3.97" touch screen, Google Assistant and built-in Chromecast - sunrise-simulation alarms, weather and a digital photo frame.

Watch the nursery, living room or hallway in 3.5K with 360° rotation, AI person and pet detection and two-way audio — all from the Xiaomi Home app.

The newest Silabs EFR32MG26 chip with the most memory in the 06 series makes the SLZB-06Mg26 a Zigbee, Thread and Matter coordinator on one board.

One unbroken five-metre run lights a whole hallway, a wall-to-wall balcony or a ceiling cove, and the IP65 coating lets the Sonoff L2 keep working where splashes happen.

If your mesh keeps growing, the EFR32MG24 with 1536 KB Flash and 256 KB RAM keeps up — and a reflash turns the dongle into a Thread or Matter radio.

The multiprotocol TI CC2674P10 radio with an ESP32-S3 host makes the SLZB-06p10 a coordinator that switches in firmware between Zigbee 3.0 and Thread, over Ethernet or USB-C.

Built on the EFR32MG24, the SLZB-06Mg24 runs Zigbee 3.0 and Thread on one radio, so your Home Assistant network reaches Matter-over-Thread too, not just Zigbee.

With an IC behind every one of its 150 LEDs, the Sonoff L3 Pro shows several colours at once and runs chasing gradients along all 5 metres — the 5V adapter is sold separately.

Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.

Covers the whole room with 360° pan and 2K detail, tracks motion, tells people from pets, talks both ways and sees in colour at night.

Backlighting a monitor, a shelf or a hallway mirror takes exactly the two metres this Sonoff L2 ships with — no dead offcuts, and IP65 lets it line a kitchen splashback.