Devices for local smart homes

Roborock Saros Z70 Robot Vacuum with OmniGrip Mechanical Arm (Black)

The OmniGrip arm tidies objects under 300 g, while 22000 Pa suction and spinning mops handle the floor for you.

LinkNLink iSG Display Max touch hub: 10″ screen, built-in Home Assistant and Zigbee 3.0, Wi-Fi 2.4/5 GHz, Bluetooth, Matter — your whole smart home from one panel.

The white version of the NSPanel Pro: same 3.95" screen and Zigbee 3.0 hub as the black one, differing only by its white frame for light-coloured walls.

A local Zigbee 3.0 plus Wi-Fi hub in one touch panel: add Sonoff sensors and relays directly, run them from the screen and sync with Home Assistant.

Drives your existing roller blind from a 35 mm in-tube motor with 8 N·m torque. Zigbee 3.0, Aqara Home app, Siri/Google/Alexa. Hub required.

Via the built-in Matter bridge, Zigbee sensors and relays show up in Apple Home, Google Home, Alexa and SmartThings; Ethernet RJ45 or 2.4 GHz Wi-Fi, up to 256 sub-devices.

That heavy-headed feeling after hours in a closed room usually points to CO2 build-up, and the AirGuard CO2 tracks it with an NDIR sensor refreshing every 5 seconds.

A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.

When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.

The Sonoff camera with a wired port: Ethernet and RTSP deliver a stable feed to an NVR or Home Assistant, while 340°/120° rotation and 15 m IR range cover the whole room.

Four Matter 16A plugs in one box: a single kit covers the boiler, heater, office and kitchen of a whole home, each with its own energy meter.

Fires your gas or water boiler on a 42-slot schedule and by voice from Apple Home, Google Home and Alexa — no hub, just WiFi.

An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.

Touch the faceplate on the wall and the warm LEDs glide down for dinner: the MINI-ZBDIM-E swaps the old switch for a complete Zigbee dimmer, no hidden module buried in the box.

Guests and kids dim the light with a real button on the wall — the round Orb-DIM panel replaces the old switch, while app, voice and 1% scene control stay there for you.

The scenario is simple: on a leak-sensor alert the hub shuts the SWV-BSP valve, and on schedule it opens garden watering for a set water volume — all over Zigbee 3.0.

Sonoff TRVZB smart Zigbee 3.0 radiator valve with heating schedules, open-window detection, child lock and frost protection, controlled via eWeLink and Home Assistant.

Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.

An old Chișinău flat leaves only the live and two load wires in the switch box, no neutral at all — the MINI-ZB2GS-L-E drops a glass Zigbee panel onto exactly that.

Pull off the white rocker that ten years of fingers turned yellow and the MINI-ZB2GS-E glass panel takes its place: two Zigbee 3.0 channels, neutral required.

The cheapest moment to make shutters smart is while walls are still open: Orb-ZBRBS drops a Zigbee panel with key, percentages and scenes into a standard 86×86 box.

An evening dim-to-30% runs entirely inside the Zigbee mesh — no Wi-Fi, no cloud: the MINI-ZBDIM takes commands straight from the coordinator and relays the network as a router.

Replace a worn double switch outright instead of hiding a relay behind it — the Orb-MW2 panel lands on the wall complete, with two independent 10 A channels.

A worn-out roller shutter button deserves replacing outright, and the Orb-RBS does exactly that — a finished 86×86 wall switch with physical up/down keys and Matter over Wi-Fi.