CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
50 products
Active filters

2,999MDL

The OmniGrip arm tidies objects under 300 g, while 22000 Pa suction and spinning mops handle the floor for you.

LinkNLink iSG Display Max touch hub: 10″ screen, built-in Home Assistant and Zigbee 3.0, Wi-Fi 2.4/5 GHz, Bluetooth, Matter — your whole smart home from one panel.

A local Zigbee 3.0 plus Wi-Fi hub in one touch panel: add Sonoff sensors and relays directly, run them from the screen and sync with Home Assistant.

Mount it anywhere outdoors — runs wireless on a 10000 mAh battery with solar panel, IP66 weatherproofing and 2.5K video. Base station included.

Two 5MP lenses in one PoE body: a fixed one for the wide shot and a pan-tilt one that tracks and zooms — the whole yard and a close-up on a single cable.

An 18-channel NVR with 8 built-in PoE ports: one recorder for a shop, a warehouse or a large house, with a 16 TB HDD bay and 4K output.

The Wi-Fi 6 take on the N110 recorder: pairs up to 10 imou cameras over the air, no cable run to each, and records locally to an HDD.

A 10-channel network recorder that writes any ONVIF/RTSP camera to its own disk up to 16TB, with 4K HDMI out — and no monthly subscription.

The PS7F 5MP outdoor PoE camera pans 355° and tilts 0–90°, auto-tracks motion and sees in colour at night up to 30 m — all over a single Ethernet cable.

The 4K take on the PS3E bullet: an 8 MP sensor reads plates and faces at range where the 5 MP only shows a shape, over PoE and ONVIF.

Via the built-in Matter bridge, Zigbee sensors and relays show up in Apple Home, Google Home, Alexa and SmartThings; Ethernet RJ45 or 2.4 GHz Wi-Fi, up to 256 sub-devices.

Where no internet reaches — a gate, a field, a building site — the Cruiser SC 4G streams over a 4G/LTE nano-SIM, with no Wi-Fi, in 5MP, IP66, with spotlight and siren.

Single-cable outdoor PoE bullet: 5MP/3K, full-colour night with spotlight, IP67 and ONVIF — the workhorse for any NVR system.

A palm-sized fanless Linux mini-server: runs Home Assistant via MQTT and Zigbee2MQTT, with an onboard EFR32MG24 Zigbee/Thread radio and no separate Raspberry Pi.

With USB Type-C and USB-to-TCP/IP passthrough, the SLZB-MR3U hands its two radios — CC2674P10 for Zigbee, EFR32MG24 for Thread — straight to the PC or server running Z2M.

That heavy-headed feeling after hours in a closed room usually points to CO2 build-up, and the AirGuard CO2 tracks it with an NDIR sensor refreshing every 5 seconds.
1,499

One network cable carries power and data: the Ranger Mini PS2M wires by PoE to an NVR, shoots 3K/5MP in colour at night and pans 355° — no crowded Wi-Fi.

Two radio SoCs in one box — CC2652P7 and EFR32MG21 — so the SLZB-MR1 runs a Zigbee network and a Thread network in parallel from a single PoE or USB-C coordinator.

A multiprotocol bridge that pulls Tuya Zigbee and Thread devices into Matter so the same gear answers Apple Home, Google and Alexa locally.

When the enemy is dust — traffic outside, a wood stove, fresh renovation — this AirGuard is the one: SAWF-07P reads PM2.5/PM10 every 2 seconds and alerts by light, sound and push.

The Sonoff camera with a wired port: Ethernet and RTSP deliver a stable feed to an NVR or Home Assistant, while 340°/120° rotation and 15 m IR range cover the whole room.

The newest Silabs EFR32MG26 chip with the most memory in the 06 series makes the SLZB-06Mg26 a Zigbee, Thread and Matter coordinator on one board.

Schedules a warm floor across 42 weekly slots and answers Matter locally from Apple Home, Google Home and Alexa — no separate Tuya hub, just WiFi.
999

If your mesh keeps growing, the EFR32MG24 with 1536 KB Flash and 256 KB RAM keeps up — and a reflash turns the dongle into a Thread or Matter radio.
999
4,999MDL
+ installation from 499 MDL