CasaSmart catalog
Hubs, sensors, relays, lighting, cameras, access control and KNX with CasaSmart installation and setup.
62 products
Active filters

The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.

Matchbox-sized and 40% smaller than the ZBMINIL, the ZBMINIL2 tucks into the cramped box behind an existing switch and makes the light smart with no neutral.

Read the room from the doorway — the SNZB-02D's large LCD shows temperature and humidity with no phone in hand, while Zigbee feeds your automations; a Zigbee 3.0 hub is required.

Hidden in the box behind a two-gang switch with no neutral, the Moes Zigbee module runs two light lines from the app while keeping the wall key.

When a renovation already runs a neutral to every switch box, the ZBMINIR2 uses it to keep a light on local Zigbee — controlled by your hub, not a cloud.

Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.

Tucked out of sight on a shelf, the SNZB-02P feeds your TRV, humidifier and air conditioner the numbers they act on — any Zigbee 3.0 hub pulls it into your scenes.

An MR16 G5.3 spotlight on 12–24V: the same lamp in a low-voltage track or fitting turns RGB plus tunable 2200–6500K white, run from any Zigbee 3.0 hub.

Catch the leak while it is still a drip — this floor sensor trips at just 0.5 mm of water and wakes your phone and the Zigbee hub siren before the screed soaks through.

Walk in and the light is already on: the SNZB-03P PIR fires within 5 seconds, covers 6 m at 110° and runs over 3 years on one CR2477 cell; automations live on a Zigbee 3.0 hub.

By day the SNZB-04P flips on the hallway light as the door opens; with the flat empty it turns guard and pushes an instant alert — automations call for a Zigbee 3.0 coordinator.

Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.

No one ever wired a switch by the bed — the SNZB-01P adds one without opening the wall: an adhesive plate holds it magnetically, or it simply lies on the nightstand.

For Zigbee2MQTT experiments and a small network of up to ~20 devices this legacy CC2531 dongle still does the job — no external antenna, firmware updates need a programmer.