Devices for local smart homes

DS18B20 Temperature Sensor 3.5mm Jack 1m for The Pill by Shelly

Digital DS18B20 temperature probe with a 1 m cable and 3.5 mm jack connector measures from -55 to +125 degrees C and plugs straight into The Pill by Shelly.

Shelly Micro USB to 5 Terminal Add-on for The Pill

Micro-USB breakout with 5 screw terminals for The Pill by Shelly: exposes 5V, GND and three IO1, IO2 and IO3 inputs/outputs for sensors and signals.

Shelly SSR Add-on for The Pill, dual-channel solid-state relay output

Expansion module with two solid-state relay outputs for The Pill by Shelly, switching DC loads up to 30 V and 300 mA per channel, silently and with galvanic isolation.

Accessory for The Pill by Shelly that extends DC measurement up to 0-30 V for 0-5 V analog sensors and battery monitoring of 4.2, 12 and 24 V cells.

Passive 3.5mm jack splitter for The Pill by Shelly: connects up to 5 DS18B20 temperature sensors at once, 21 cm cables, plug-and-play.

Miniature Shelly Gen3 module powered by 5V over USB-C, with three configurable inputs and outputs, support for DS18B20 and DHT22 sensors, Wi-Fi and a Bluetooth gateway.

Black surface-mount housing with a wired button that holds a Shelly relay or dimmer without a wall box; 220-240 V supply.

White surface housing with an integrated button that lets you mount a Shelly Plus, Gen3 or Gen4 relay or dimmer on any wall without a flush box.

A pair of LoRa Add-on modules adding long-range radio (up to 5000 m) to compatible Shelly Gen3 and Gen4 devices through the proprietary serial interface.

LoRa expansion module that adds long-range radio of up to 5 km to Shelly Gen3 and Gen4 devices via the proprietary serial connector.

A 400A split-core clamp with screwless snap-on mounting, 650 mm cable and a 2-pin MX3.0 connector, made for the Shelly Pro 3EM-400 energy meter.

Split-core 120 A current transformer with ferrite core and 650 mm cable. An accessory for the Shelly Pro 3EM three-phase meter that clamps onto a conductor without cutting the line.

Split-core 50A current clamp with ferrite core for Shelly Pro EM-50 and EM Gen3 meters, with a 60 cm cable and Molex Micro-Fit connector.

Split-core 120 A current clamp that snaps onto a live cable without cutting and feeds the reading to a Shelly Pro 3EM energy meter via a dedicated plug.

Ferrite-core current clamp rated 80A with a 7 mm window and a 60 cm lead with connector, made for the Shelly EM Gen3 energy meter.

50A split-core current clamp, an accessory for the Shelly EM energy meter. Clips around the live wire without cutting it, with a 60 cm lead.

Digital DS18B20 probe with 1 m cable and stainless-steel housing, a 1-Wire accessory for Shelly Plus Add-on or Shelly Uni; measures from -55 to +125 degrees Celsius.

Digital DS18B20 temperature probe on a 3 m cable, an accessory for Shelly devices with the Plus Add-on or Shelly Uni. Stainless steel, IP67, -55 to +125°C.

A 4-channel wiring accessory that turns the 230V AC signal from classic wall switches into safe DC triggers for compatible Shelly devices.

Single-channel optocoupler wiring accessory that turns an existing 230V~ signal into a safe DC trigger for the inputs of Shelly Plus and Pro modules.

Passive RC module that shields a Shelly relay from voltage spikes when switching motors, pumps and transformers. Wired in parallel with the inductive load.

Passive accessory that lets Shelly 1L Gen3 and 2L Gen3 relays work without a neutral wire and correctly switch low-power LED lamps.

Passive Shelly Bypass module that removes LED flicker and ghost glow on no-neutral Shelly devices switching loads below 20 W.

Black desktop stand for the Shelly Wall Display that holds the panel at a 35° angle and feeds power through a built-in Schuko plug. A passive accessory with no smart features of its own.