Smart lighting — controllers, strips, scenes.
Official importer of Sonoff and Gledopto. CCT/RGB calibrated for Moldovan residential spaces.
13 products
Active filters
Technical comparison of the 5 dominant smart-home protocols. Values reflect realistic scenarios on the Moldovan market (May 2026).
| Feature | Zigbee 3.0 | Matter / Thread | Wi-Fi | KNX TP | Bluetooth LE |
|---|---|---|---|---|---|
| Radio band | 2.4 GHz | 2.4 GHz (Thread) | 2.4 / 5 GHz | wired bus | 2.4 GHz |
| Topology | Mesh | Mesh | Star (router) | Line / tree | Point-to-point |
| Hub required? | Yes (Zigbee coordinator) | Yes (Thread border router) | No (existing router) | Yes (IP gateway for integration) | No (phone = hub) |
| Works without internet | ✅ fully local | ✅ fully local | ⚠️ depends on brand | ✅ fully local | ✅ within Bluetooth range |
Yes. Products in this category support at least one of Zigbee, Matter, or Wi-Fi, making them compatible with Home Assistant (recommended for local control), Apple Home via Matter bridge, Google Home, and Amazon Alexa. Each device's exact specification is shown on its product page under "Compatibility".

Four digital outputs on one WLED ESP32: the GL-C-618WL drives up to 1600 pixels across large installs over Wi-Fi or Ethernet, no hub.

With two digital outputs and an Ethernet port, the Elite 2D-EXMU runs WLED on an ESP32 and drives two addressable-pixel strips from one controller, no hub.

From the Tuya/Smart Life app it runs a WS2812B or SK6812 addressable strip with no gateway: over Wi-Fi, pixel effects, two SPI outputs and up to 1000 LEDs.

Two digital outputs on an ESP32 with WLED pre-flashed: the GL-C-615WL drives two addressable strips over Wi-Fi from the WLED UI, no gateway.

Chase, rainbow and per-pixel effects on a WS281x addressable strip, run from Smart Life through a Tuya ZigBee gateway: two SPI outputs, 15 A.

The Type-C UART port lets any enthusiast reflash and update the WLED firmware on the ESP32, while the GL-C-017WL-D drives pixel LEDs over Wi-Fi with no gateway.

A single digital output on an ESP32 running WLED firmware: the cheapest way into pixel effects on one addressable strip, over Wi-Fi with no gateway.

At 10 A per channel and 15 A total, the GL-C-601P drives long RGBCCT runs that make mini controllers give up — the workhorse for large rooms.

On a 35 mm DIN rail in the panel, the GL-C-011P drives an RGBCCT strip line over Zigbee 3.0 — the controller sits by the breakers, not buried behind the strip.

An RGB+CCT strip controller that speaks Matter over Wi-Fi directly and joins Apple Home, Google Home and Alexa with no Zigbee hub or Tuya gateway.

The latest Zigbee Pro+ radio in a 42 mm body: the GL-C-301P drives any 5-in-1 LED strip up to 10 A with improved range and link stability.

Pencil-thin, this Zigbee 5in1 controller carries 6 A per channel and slips into an aluminium profile or a tight ceiling void where others will not fit.

Gledopto's smallest Zigbee controller, built for one WW/CW strip: it hides inside the aluminium profile or behind the skirting and disappears from sight.
| Typical latency | 50–150 ms | 30–100 ms | 100–500 ms (cloud) | < 20 ms | < 50 ms |
|---|
| Max distance / node | 10–20 m (indoor) | 10–20 m (indoor) | 15–30 m | 1000 m (cable) | 5–10 m |
|---|
| Max devices on network | ≈ 250 (mesh) | ≈ 250 (Thread) | ≈ 50–100 / router | 64,000 / installation | 1 master / session |
|---|
| Battery drain | Very low (years) | Very low (years) | High (days-weeks) | N/A (mains-powered) | Low (months) |
|---|
| Typical device cost | 150–800 MDL | 200–1200 MDL | 100–600 MDL | 800–8000 MDL | 50–400 MDL |
|---|
| Typical use case | Apartments, houses (multi-room) | Apple Home / cross-vendor | Cameras, plugs (2-3 devices) | Large villas, commercial, KNX-design | Beacons, device finding |
|---|
Our team of certified installers covers Chișinău and all of Moldova. For simple devices (Wi-Fi plugs, Zigbee sensors) installation starts at 200 MDL. For complex systems (KNX, multi-room automations) we quote after project evaluation. Pre-sale consultation is free.
All devices in this category carry a 24-month warranty (double the Moldovan legal minimum of 12 months). For factory defects: free exchange or in-warranty repair. For shipping damage: replacement within 7 business days.
30 days for no-questions-asked returns (Moldovan Law 105/2003 sets a 14-day minimum; we voluntarily extend). The product must be unopened or "like-new". Refund within 7 business days via the original payment method.