Devices for local smart homes

Smlight SLZB-06p7 CC2652P7 Zigbee coordinator with Ethernet, PoE, USB

The SLZB-06p7 Zigbee coordinator on the CC2652P7 chip, with a +20dB amp and +5dB antenna, holds a large whole-house mesh over Ethernet, PoE or USB.

The multiprotocol TI CC2674P10 radio with an ESP32-S3 host makes the SLZB-06p10 a coordinator that switches in firmware between Zigbee 3.0 and Thread, over Ethernet or USB-C.

Built on the EFR32MG24, the SLZB-06Mg24 runs Zigbee 3.0 and Thread on one radio, so your Home Assistant network reaches Matter-over-Thread too, not just Zigbee.

Built on the Silicon Labs EFR32MG21, the SLZB-06M is the 06-family pick for those on the Silabs stack — ZHA or deCONZ — with USB-C, Ethernet and PoE at once.

Smlight's original Zigbee 3.0 coordinator on the TI CC2652P, with USB-C, Ethernet and PoE: one device bridges your Zigbee mesh to Z2M or ZHA.

Covers the whole flat with dual-band Wi-Fi 5 up to 1167 Mbps, 4 antennas, 3 Gigabit ports and Mi WiFi app control.

Covers a flat with dual-band Wi-Fi 6 — 1201 Mbps on 5 GHz plus 300 Mbps on 2.4 GHz, four Gigabit ports and four antennas.

The 43 mm body with its tilting antenna takes just one server USB port, and the bundled 0.5 m extension keeps the coordinator radio clear of USB 3.0 noise.

Passive PoE splitter that turns one 802.3af line into two outputs and carries data plus power another 100 m — to power SLZB-06 coordinators where there is no socket.

Portable three-phase EV charger up to 11 kW with Type 2 connector, adjustable 6-16 A current, IP65 enclosure, Wi-Fi and Bluetooth for the Shelly Smart Control app.

Three-phase DIN-rail energy meter with current transformers up to 400 A per phase, accuracy class B, Wi-Fi, Ethernet and Bluetooth for industrial panels.

Shelly Pro 3EM 120A three-phase DIN-rail energy meter with three 120A CT clamps, accuracy class B, Wi-Fi, Bluetooth and Ethernet for monitoring three lines at once.

Shelly Pro 3EM-3CT63 three-phase DIN-rail energy meter with three 63A CT clamps, Class B accuracy, Wi-Fi, Bluetooth and Ethernet for real-time monitoring.

Single-phase DIN-rail energy meter with two channels, 50A clamps included, contactor relay, 1% accuracy and Wi-Fi, Bluetooth and Ethernet connectivity.

Shelly DIN-rail switch with 5x RJ45 10/100 Mbps ports builds a wired backbone for Shelly Pro devices in the panel. Powered at 110-230 V, mounts on a DIN rail.

Shelly Pro LoRa Add-on gives Shelly Pro devices long-range LoRa EU868 communication up to 5000 m with an SMA antenna and built-in AES-CCM encryption.

Shelly Pro DIN-rail dimmer with two 0-10V outputs for dimmable LED drivers, energy metering, Wi-Fi, Bluetooth and Ethernet for control inside the panel.

Shelly Pro Dimmer 1PM DIN-rail dimmer with 1 channel, trailing-edge phase control, load up to 200 W, built-in power metering, Wi-Fi, Bluetooth and Ethernet RJ45.

Professional 5-channel DIN-rail LED controller with 12-24 VDC supply, power metering, Wi-Fi, Bluetooth and an RJ45 Ethernet port for the distribution board.

Four-channel DIN-rail module with 16 A per channel and 40 A total, AC power metering, color display, Wi-Fi, Bluetooth and Ethernet for professional panels.

DIN-rail controller for two independent shutter and blind motors with per-channel current, voltage and power metering, Ethernet, Wi-Fi and Bluetooth, made for distribution-board mounting.

Professional Shelly Pro 3 DIN-rail relay: 3 independent dry contacts of 16 A each (48 A total), switches three-phase lines, wired Ethernet, Wi-Fi and Bluetooth for switchboard automation.

Two-channel DIN-rail relay, 2 modules wide: 16 A per channel, per-channel power metering, Wi-Fi, Ethernet RJ45 and Bluetooth for distribution-board mounting.

Single-channel Shelly Pro 1PM DIN-rail relay, 1 module wide: switching up to 16 A, built-in power metering, Wi-Fi, wired Ethernet (RJ45) and Bluetooth for distribution-board mounting.