Devices for local smart homes

Moes Star Feather ZS-SF-EU4 Zigbee wall switch, 4-gang, grey

Four separate loads on one grey plate by the door: hallway light, stairs, terrace and a sconce each run their own line through a Zigbee gateway, no four-frame wall.

Sonoff SwitchMan ZBM5-3C Zigbee wall switch, 3-gang, 86 type, white

An open kitchen-living keeps three light lines — ceiling spots, the table lamp, the under-cabinet strip — on one white frame, every key on Zigbee and answering the local hub.

Three light lines of an open kitchen-living sit on one grey feather-textured frame: ceiling, spots and table, each on its own touch key.

Two white keys on one frame each run their own zone over the home Zigbee mesh: kitchen and living room answer to a local hub, with the Wi-Fi router kept out of the path.

An old Chișinău flat leaves only the live and two load wires in the switch box, no neutral at all — the MINI-ZB2GS-L-E drops a glass Zigbee panel onto exactly that.

Add one more repeater to your Zigbee mesh: wired with neutral, the ZBM5 relays the network and answers a local Home Assistant — no cloud, no account.

Pull off the white rocker that ten years of fingers turned yellow and the MINI-ZB2GS-E glass panel takes its place: two Zigbee 3.0 channels, neutral required.

Replace a worn double switch outright instead of hiding a relay behind it — the Orb-MW2 panel lands on the wall complete, with two independent 10 A channels.

Pull the old mechanical switch off the wall and ZBMINIL2-E takes its place — a finished Zigbee switch with its own button that asks for no neutral in the box.

One stop by the front door switches off the whole exit route — three independent channels drive the hallway, kitchen and bathroom lights from a single 3-gang plate.

Start your smart home where you sleep or work: the Orb-MW1 wall switch brings schedules and voice control to a single room, leaving the rest of the flat for later.

In the evening the chandelier rests — one key keeps just the soft sconce light, the other brings back full brightness for cleaning: two lighting zones in one 86×86 frame.

To guests it is just a wall switch — the key travels with the same mechanical click they expect, no touch glass or screens, while schedules and voice control work quietly inside.

Wireless 4-button switch on a CR2032 battery with Bluetooth and an adapter for Gira and Merten frames. Up to 16 actions, no wiring or wall chasing needed.

Wireless four-button Bluetooth (BLE) switch powered by a CR2032 battery, bundled with an adapter for Legrand Niloe and Shelly frames. Installs without wiring or wall chasing.

Wireless 4-button BLE switch on battery, bundled with a Busch-Jaeger frame adapter: no wiring, 16 actions and up to 2 years of life.

Wireless battery wall switch with 4 buttons and Bluetooth Low Energy. The Stand Alone version includes a back plate for wire-free mounting or use as a portable remote in any room.