Devices for local smart homes

Sonoff MINI-ZBDIM-E Zigbee 3.0 wall dimmer switch with own faceplate

Touch the faceplate on the wall and the warm LEDs glide down for dinner: the MINI-ZBDIM-E swaps the old switch for a complete Zigbee dimmer, no hidden module buried in the box.

Sonoff MINI-ZBDIM Zigbee 3.0 in-wall smart dimmer module

An evening dim-to-30% runs entirely inside the Zigbee mesh — no Wi-Fi, no cloud: the MINI-ZBDIM takes commands straight from the coordinator and relays the network as a router.

Evenings at a soft 20% and mornings at full power happen behind your existing switch — the MINI-DIM hides in the wall box and keeps the wall button working.

On a white wall two glowing Star Ring discs handle the evening: a tap switches each light group on, a long press eases the brightness down without flicker.

Two LED circuits on one grey glass frame: the Star Ring dimmer sets the chandelier and the spots apart, each gang with its own brightness, through a Tuya Zigbee gateway.

A white glass plate with a lit ring sets brightness by touch or twist; on the Zigbee network through a Tuya gateway it eases the light from night-glow to full chandelier.

A grey glass panel with a glowing ring shows the level, and holding a button dims the light smoothly through a Tuya Zigbee gateway — for dimmable LEDs up to 200 W.

Shelly Pro DIN-rail dimmer with two 0-10V outputs for dimmable LED drivers, energy metering, Wi-Fi, Bluetooth and Ethernet for control inside the panel.

Shelly Pro Dimmer 1PM DIN-rail dimmer with 1 channel, trailing-edge phase control, load up to 200 W, built-in power metering, Wi-Fi, Bluetooth and Ethernet RJ45.

Wi-Fi controller that drives 0-10V lighting drivers through a low-voltage signal, with two outputs, two button inputs, 110-240 VAC supply and Bluetooth for fast local setup.

Smart in-wall dimmer without a neutral wire, trailing-edge control up to 200 W. Multiprotocol Wi-Fi, Bluetooth, Zigbee and Matter for any smart home ecosystem.

Smart WiFi and Bluetooth dimming module that smoothly adjusts light brightness, runs without neutral and fits inside the wall box behind your switch.

0-10V/1-10V signal controller for dimmable LED drivers and ballasts: relay up to 13 A, power metering, Wi-Fi and Bluetooth, two S1/S2 inputs.

Gen3 single-master DALI controller with built-in bus power: dims up to 5 DT6 drivers over Wi-Fi 2.4GHz and Bluetooth, no external DALI module required.