Verified compatibility
We test every device for these ecosystems. For non-standard integrations contact us before ordering.
- Home Assistant
- Zigbee
- Matter
- KNX
- Wi-Fi
Compatibility
Works with these ecosystems
Protocols
- Wi-Fi
- BLE
Ecosystems
- Home Assistant
- Google Home
- Amazon Alexa
- Samsung SmartThings
What it is, who it's for, what it does
About this product
Shelly Plug PM Gen3 White is a Wi-Fi smart plug adapter that sits between any Schuko wall socket and your appliance, turning it into a remotely controllable device. Its core job is plug-level power metering: it records instantaneous power, voltage, current and accumulated energy in kWh, so you can see what each appliance really costs to run.<br><br>It handles a load of up to 16 A and 3680 W (resistive load), runs on 230 V~ 50 Hz, and communicates over 2.4 GHz Wi-Fi and Bluetooth 4.2 with no separate hub. The input is a CEE 7/7 connector and the output is a Type-F / Schuko (CEE 7/3) socket. The compact 44x44x70 mm body in white blends discreetly into any home.<br><br>You control it from the Shelly Smart Control app with schedules, scenes and automations, and integrate it with Google Home, Amazon Alexa, Samsung SmartThings or Home Assistant. An internal temperature sensor and load protections add everyday peace of mind.
- DeliveryFree from 1500 MDL
- Returns30 days to return
- Warranty24 months
15+projects delivered300+devices installed3 yearslocal-first experienceChișinăushowroom Columna 153Book a showroom visit →
CasaSmart essentials
What it works with, what it needs, what you can do
Install & requirements
What you need on your side and what we deliver.
- Zigbee hub or Matter gateway for wireless variants
- 65 mm back-box or DIN panel for wired variants
- Local setup on Home Assistant — included in install
Smart scenarios
Three typical automations we set up after the install.
- 01Morning: warm light + blinds up + climate at 22 °C
- 02Leaving: lights off, arm sensors, close the gas
- 03Evening: warm ambient + cinema scene
Where it works
Use cases
A family in Chisinau wants to see the heater's share of the electricity bill and optimise its heating schedule.
Plug an electric water heater through the socket and measure how many kWh it uses per week.
A laptop-and-chargers corner in the bedroom is powered down overnight for savings and safety.
Create a schedule that cuts power after midnight and restores it in the morning.
In winter the user pre-heats a room in the apartment before arriving, without leaving the device on all day.
Turn on an oil radiator from the app on your way home, staying under 3680 W.
Analytics
See consumption — save on bills
Real-time consumption tracking via the eWeLink app. Daily, weekly and monthly history helps identify the most energy-hungry devices.
For the installerTechnical specificationsfull spec · wiring · datasheet
For the installer
Technical specifications
full spec · wiring · datasheet
Power
- Maximum load
- 16 A
- Максимальная мощность
- 3680 W
- Power
- 230 В~ 50 Гц
- Own consumption
- < 1 W
Wireless
- Wi-Fi
- 802.11 b/g/n 2.4 ГГц
- Bluetooth
- 4.2
Connectivity
- Energy measurement
- мощность, напряжение, ток, кВт-ч
Physical
- Connectors
- вход CEE 7/7, выход Type-F / Schuko (CEE 7/3)
- Dimensions
- 44x44x70 mm
- Weight
- 48 g
Environment
- Operating temperature
- -20...40 °C
Other
- Processor
- ESP-Shelly-C38F, 8 МБ flash
Support
Frequently asked questions
How much load does the Shelly Plug PM Gen3 handle?
It is rated for up to 16 A and 3680 W for resistive loads at 230 V~ 50 Hz. For motors or compressors with high inrush current, keep a margin below this limit.What does this smart plug measure?
It records active power (W), voltage (V), current (A) and accumulated energy in kWh in real time, so you can see exactly what each connected appliance costs to run.Do I need a Shelly hub for the Plug PM Gen3?
No. The plug connects directly to your home router over 2.4 GHz Wi-Fi and also has Bluetooth 4.2 for local setup, so no separate hub is needed.Which voice assistants and platforms does it work with?
It works with Google Home, Amazon Alexa and Samsung SmartThings for voice control, plus Home Assistant for advanced local automations; it also supports MQTT and webhooks.What plug and connector type does it use?
The input is a CEE 7/7 connector and the output is a Type-F / Schuko (CEE 7/3) socket, compatible with standard sockets in Moldova.What is the warranty and availability at CasaSmart?
The product comes with a 24-month warranty. CasaSmart is an official importer in Moldova and offers free consultation; please check current availability of the white variant before ordering.
Same ecosystem
Works together
Devices that run in the same smart-home ecosystem.
Shelly
Shelly Wave Pro Dimmer 2PM Z-Wave 2-Channel DIN Dimmer Metering
—
Shelly
Shelly Wave Pro Dimmer 1PM Z-Wave DIN-rail dimmer with metering
—
Shelly
Shelly Wave PRO 3 LR – Z-Wave DIN 3-channel relay 16A
—
Shelly
Shelly Wave Pro Shutter - Z-Wave DIN-rail roller shutter and blind controller
—
Shelly
Shelly Wave PRO 2PM Z-Wave 2-channel DIN-rail relay with metering
—
Shelly
Shelly Wave Pro 2 - Z-Wave 2-channel DIN-rail relay
—
Same category
Similar products
Close models and alternatives from the CasaSmart catalog.
IMOU
imou CE2P 4-pack smart plug Matter 16A with energy monitoring, white
899MDL
Sonoff
Sonoff Orb Socket WS01TPF-E Matter in-wall smart socket Type F
599MDL
Moes
Moes Star Ring ZK-SR-EU Zigbee in-wall socket 16A energy monitor, white
549MDL
Moes
Moes Star Ring Zigbee in-wall socket with energy meter 16A, grey
549MDL
IMOU
imou CE2P Matter Wi-Fi smart plug 16A with energy monitoring, 2-pack
499MDL
Sonoff
Sonoff S60ZBTPF iPlug Zigbee smart plug 16 A with energy monitoring
449MDL
Manager guidance
Questions about this product?
A CasaSmart manager calls you within 1–2 working hours and answers anything — compatibility, install, alternatives.
+373 60 944 922Updated: · reviewed by CasaSmart Expert Team