Does the front work on its own without a relay?

No. It is a passive front with no electronics and must wire to the SW input of a separately purchased Shelly relay; only then does it switch anything.

Which Shelly relays is it compatible with?

The set includes three holders: for Shelly 1/1PM; for all Shelly Plus and Gen3/Gen4 (1, 1PM, 2PM, i4, Dimmer, DALI Dimmer); and for Shelly 1L / Dimmer 2.

Is the switch frame included?

No. The switch frame and the Shelly relay are sold separately; the box contains the single-button front and the three holders.

What are the dimensions and material?

The front measures 70x70x12 mm (without the holder) and is made of plastic in white, sized for standard back boxes.

What are the contact electrical ratings?

Maximum switched voltage 12 V DC / 18 V AC and up to 50 mA on the signal circuit to the SW input; the power load is switched by the relay.

Who should install this product?

Wiring to the SW input and mounting the relay in the back box are done in the existing wiring, so the work should be carried out by a qualified electrician.

Shelly Wall Switch 1 White, single button

Name: Shelly Wall Switch 1 White — Single-Button Wall Front
Brand: Shelly
SKU: SHELLY-WALL-SWITCH-1-WHITE

casasmart.md

What it is, who it's for, what it does

About this product

The Shelly Wall Switch 1 White is a passive single-button wall front that turns any Shelly installation into a familiar physical switch on the wall. It holds no electronics and no radio: the two contacts of the front wire to the SW input of a Shelly relay hidden in the back box, and every press is passed to the relay as an ordinary control signal.<br><br>The plastic body measures 70x70x12 mm and fits standard back boxes as well as narrow mounting cavities. Three swappable holders are included in the set: for Shelly 1/1PM, for all Shelly Plus devices plus Gen3/Gen4 models, and for Shelly 1L and Dimmer 2. The switch frame and the relay itself are sold separately, so the solution can be matched to a specific interior and scenario.<br><br>Contact ratings: maximum 12 V DC / 18 V AC, current up to 50 mA, operating range -20 to +70 °C, humidity up to 85 %. The white finish blends neutrally into most Chisinau apartment interiors.

Delivery
Free from 1500 MDL
Returns
30 days to return
Warranty
24 months

15+projects delivered300+devices installed3 yearslocal-first experienceChișinăushowroom Columna 153Book a showroom visit →

Where it works

Use cases

In the hallway of a Chisinau apartment a Shelly relay is hidden in the back box, and the white front controls the ceiling light like an ordinary switch.

The front wires to the SW input of the Shelly relay behind it and turns lights on with a single press.

One press by the front door turns off all lights in the flat through a scene configured on the Shelly relay.

A press is passed to the relay, which launches a scene spanning several devices.

During a renovation in an older Chisinau building, the electrician replaces the mechanical switch with this front and a Shelly relay, without chasing the wall.

The front fits an existing back box in place of the old switch.

For the installer

Technical specifications

full spec · wiring · datasheet

Physical

Dimensions: 70x70x12 mm
Material: Plastic
Colour: White
Buttons: 1

Power

Max switching voltage: 12 VDC / 18 VAC
Max switching current: 50 mA

Environment

Operating temperature: -20 to 70 °C
Humidity: up to 85 %

Connectivity

Included holders: 3 (Shelly 1/1PM; Plus and Gen3/Gen4; 1L/Dimmer 2)

Full device datasheet

Support

Frequently asked questions

Does the front work on its own without a relay?
No. It is a passive front with no electronics and must wire to the SW input of a separately purchased Shelly relay; only then does it switch anything.
Which Shelly relays is it compatible with?
The set includes three holders: for Shelly 1/1PM; for all Shelly Plus and Gen3/Gen4 (1, 1PM, 2PM, i4, Dimmer, DALI Dimmer); and for Shelly 1L / Dimmer 2.
Is the switch frame included?
No. The switch frame and the Shelly relay are sold separately; the box contains the single-button front and the three holders.
What are the dimensions and material?
The front measures 70x70x12 mm (without the holder) and is made of plastic in white, sized for standard back boxes.
What are the contact electrical ratings?
Maximum switched voltage 12 V DC / 18 V AC and up to 50 mA on the signal circuit to the SW input; the power load is switched by the relay.
Who should install this product?
Wiring to the SW input and mounting the relay in the back box are done in the existing wiring, so the work should be carried out by a qualified electrician.

Same category

Questions about this product?

A CasaSmart manager calls you within 1–2 working hours and answers anything — compatibility, install, alternatives.

+373 60 944 922

Updated: 18 June 2026· reviewed by CasaSmart Expert Team