Devices for local smart homes

Shelly 50A Current Transformer for Pro EM-50 and EM Gen3

Split-core 50A current clamp with ferrite core for Shelly Pro EM-50 and EM Gen3 meters, with a 60 cm cable and Molex Micro-Fit connector.

Shelly CT 120A split-core current transformer for Pro 3EM

Split-core 120 A current clamp that snaps onto a live cable without cutting and feeds the reading to a Shelly Pro 3EM energy meter via a dedicated plug.

Shelly 80A Current Transformer with Connector for EM Gen3

Ferrite-core current clamp rated 80A with a 7 mm window and a 60 cm lead with connector, made for the Shelly EM Gen3 energy meter.

50A split-core current clamp, an accessory for the Shelly EM energy meter. Clips around the live wire without cutting it, with a 60 cm lead.

Digital DS18B20 probe with 1 m cable and stainless-steel housing, a 1-Wire accessory for Shelly Plus Add-on or Shelly Uni; measures from -55 to +125 degrees Celsius.

Digital DS18B20 temperature probe on a 3 m cable, an accessory for Shelly devices with the Plus Add-on or Shelly Uni. Stainless steel, IP67, -55 to +125°C.

A 4-channel wiring accessory that turns the 230V AC signal from classic wall switches into safe DC triggers for compatible Shelly devices.

Single-channel optocoupler wiring accessory that turns an existing 230V~ signal into a safe DC trigger for the inputs of Shelly Plus and Pro modules.

Passive RC module that shields a Shelly relay from voltage spikes when switching motors, pumps and transformers. Wired in parallel with the inductive load.

Passive black accessory that swaps the Shelly Wall Display Stand cap for a 230 V Schuko CEE 7/3 socket rated up to 5 A, putting power within reach.

Passive accessory that lets Shelly Dimmer Gen3 run without a neutral wire on LED loads under 20 W. Mounts behind the fixture, next to the lamp.

Passive accessory that lets Shelly 1L Gen3 and 2L Gen3 relays work without a neutral wire and correctly switch low-power LED lamps.

Passive Shelly Bypass module that removes LED flicker and ghost glow on no-neutral Shelly devices switching loads below 20 W.

White CEE 7/3 (Schuko) socket adapter that replaces the cap of the Shelly Wall Display Stand and adds a tidy, built-in 230 V outlet to the desktop stand.

Original Shelly USB charger in a black housing with USB-A and USB-C ports, made to power the Shelly Wall Display Stand desk holder. A passive accessory, not a smart device.

White USB charger with Type-A and Type-C ports, made specifically to power the desktop stand of the Shelly Wall Display panel in homes across Chisinau.

Black desktop stand for the Shelly Wall Display that holds the panel at a 35° angle and feeds power through a built-in Schuko plug. A passive accessory with no smart features of its own.

Black triple decorative frame, screwless, for three Shelly Wall Switch buttons; a passive plastic accessory with no electronics, clip-on mounting.

White triple decorative frame without screws and with a glass-look finish that unites three Shelly Wall Switch units into one neat wall panel.

Black two-gang decorative frame for two Shelly Wall Switch units, screwless mounting and a clean look. Passive accessory with no electronics inside.

White double decorative frame in glass-look plastic for two Shelly Wall Switch modules. A passive accessory with no electronics; switches and relay sold separately.

Black single-gang decorative frame for the Shelly Wall Switch. A passive accessory without electronics that gives a clean finish to wall-mounted smart installations.

Passive single-gang decorative frame, white, for Shelly Wall Switch. Glass-like look, tool-free snap fit, no electronics. The switch itself is not included.

Black Schuko flush socket from Shelly, 250V 16A 3680W, passive insert 70x70x40 mm for the Shelly Wall Switch series with a Shelly frame sold separately.