Yeelight · YP-0464

Yeelight Pro E20 recessed magnetic track 1m, Z1, black

Name: Yeelight Pro E20 recessed magnetic track 1m, Z1, black
Brand: Yeelight
SKU: 1-000006012

Price to be confirmedPre-order

Manufacturer image shared by the series. Check the colour, length, power and connection type in the model name and specifications.

Price to be confirmedPre-order

Pre-order Help finding the right fit

Check compatibility

Track system: Yeelight Pro E20 — recessed track
Role in the system: Track

A 1m section of Yeelight Pro E20 recessed magnetic track: set into a 35mm groove in plasterboard, it carries E-series fixtures and the 48V power supply.

11 specifications from manufacturer documents

We deliver across Moldova. Availability, delivery timing and cost are confirmed with a manager before order fulfilment.

The right choice starts with specifications

Device passport

Document model: YP-0464

Specifications checked against the linked manufacturer documents.Checked 18 October 2026

Model and version3

Track system — what it means Which magnetic system the item belongs to. Tracks, lights, connectors and power supplies of different systems do not fit each other: the track profile and supply voltage differ, so every part of one run must come from the same system.	Yeelight Pro E20 — recessed trackThe manual calls the system Yeelight Z1: a magnetic track with a 48 V low-voltage supply; the Yeelight catalogue and brochure call it the E20 recessed magnetic system (E series) [1]
Colour — what it means The housing colour of this model. Other colours in the same series are separate products.	BlackFrom the cn.yeelight.com catalogue (1 m E20 track, code YLYPJ-0001); the manual does not state the colour [2]
Standards stated in documents	GB/T 13961 [1]

Control and features1

Role in the system — what it means What the part does in the run. The track carries the lights and conducts power, connectors continue or branch the run, and the driver (power supply) converts 230 V mains into low voltage for the track.	Track [1]

Housing and installation5

Track length — what it means The length of one track section. A run of the required length is built from several sections and connectors: long sections mean fewer joints, short ones suit niches and small rooms.	1 mModel YP-0464 is a 1 m section; the same series has 1.5 m (YP-0465) and 2 m (YP-0466) sections [1]
Installation method — what it means A surface track is screwed directly onto a finished ceiling or wall. A recessed track is set into a groove in plasterboard and ends up flush with the ceiling — it is planned before renovation. A suspended track hangs on cables below the ceiling.	RecessedThe track is laid in a groove in the ceiling or wall, fixed with self-tapping screws longer than 55 mm and covered with a second layer of plasterboard leaving room for the skim coat; the dust cover goes on and the surface is skimmed flush with the track edge [1]
Recess groove size — what it means Width and depth of the groove prepared in the ceiling for a recessed track or its corner pieces. It goes into the plan before the plasterboard is installed. Not applicable to surface parts.	Width 35 mm (+1/−0 mm), depth over 80 mmThe manual's table gives the cut-out for YP-0464 as 1005 × 35 × 80 mm (L × W × D). The groove for the whole run, joints and corner pieces included, is marked out and cut in one go [1]
Dimensions — what it means The device’s size in millimetres as the maker states it. Check that it fits the wall box, niche or shelf.	Not stated by the manufacturer
Weight — what it means The device’s weight without packaging, per the maker.	Not stated by the manufacturer

Package contents2

Package contents — what it means What comes in the box, per the maker.	6 track sections, 12 joining plates, 6 dust covers, 12 end caps, 48 wall plugs, 48 screws, 48 set screws, 1 hex keyAs listed in the manual's table for model YP-0464: a pack of 6 track sections with fixings. Connectors and the power supply are not included [1]
Required components	In-track power supply, 100 or 200 W; straight connector YP-0473 at straight joints, double-head connector YP-0472 at 90° cornersThe manual marks both connectors as required and sold separately [1]

Power1

Track voltage	48 VDC: the Z1 system runs on a 48 V low-voltage supply; the in-track power supplies deliver 48 V [1]

Connectivity and compatibility1

Compatibility	Yeelight Pro E20 / Z1 (48 V) system only: Z1 magnetic lights, in-track power supplies, connectors and L-type corners of this system [1]

The track is installed before final finishing, in a groove 35mm wide and over 80mm deep; the power supply and connectors are sold separately.

Manufacturer documents

Clear purchase details

Delivery and stock

We deliver across Moldova. Availability, delivery timing and cost are confirmed with a manager before order fulfilment.

How is payment handled?

A website order is submitted for confirmation without charging your card. The payment method and final amount are agreed with a manager before payment.

Warranty and documents

The warranty is at least 12 months. The exact period and conditions for equipment and installation work are stated in the sales documents and the accepted proposal. Further support is agreed for each project.

Can I return the product?

Current conditions are published on the Return policy page. Email office@casasmart.md with your order number for the steps relevant to your situation. Statutory consumer rights continue to apply.

Delivery, payment and returns